Discussion Locked

Modem unable to pass a signal to handset

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello Everyone,

I am trouble shooting a Modem problem on an older PC. The modem is a Creative Modem Blaster model Di5660 (ISA). It dials out fine and has no IRQ problems, but it will not pass a signal to an attached phone (no dial tone). I've checked Creative's site and they have some good info, but nothing on this. My first thought was that the modem was bad, but it works every other way.

Any Ideas?

3 replies

by thechas

It is the modem card.

Either the connector for the pass through connection is bad.

Or, one of the contacts on the relay that disconnects the pass-through connection is bad.

A 3rd possability is a bad solder connection on the board.

Chas

This discussion is closed to new replies.