Discussion Locked

Mouse with a mind of it's own

0 helpful
28 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a computer with a mouse that moves about the screen on it's own, almost as if it were being controled remotely. I flits around clicking on icons and startmenu items and bringing up property dialog boxes.
I have ruled out remote control by anunknown user by taking it off the network.

The OS is windows 2000. Does anyone have any ideas on what could be the problem??

28 replies

by cg it

If you mouse has a ball on the bottom, the ball and inside rollers are dirty. Pop the cover off, clean the ball and with a Q tip (or can of compressed air) clean off the lint that's collected on the rollers. If you have an optical mouse, try gettingnew drivers or reinstall the drivers.

by wcp

1. Replace the video card. If the video is integrated, put a PCI or AGP video card that fits to your motherboard.
2. If this does not work, scan for virus.
3. Try a different mouse if you have not done it yet.

by rapidad

Lets check a few things
1. dont touch the mouse during a bootup, does it still take off and run??
2. remove the mouse, do you see a mouse cursor after bootup?
3. remove the mouse ball and bootup, still running wild?
4. replace the mouse, still run wild?
5. is there a time when it isnt running around? check the (count )processes in task manager, get the mouse running and check (count) again, different?, can you find the process that is causing it?
6. it really does sound like one or the other of the two previous answers is correct, its either sticky rollers (sometimes you have to get brutal and using an exacto knife cut off the lint/goo accumulated on the little rollers), or a virus.
the virus sounds more like it, there were at several times different games that chased the mouse or were chased by the mouse, and these have been adapted by crackers for nefarious purposes.
let us know the answeres to these and we will try again to answer your question.

by inmedia48

Nice step-by-step for attacking the problem. After replacing the mouse and scaning every file for virus' what finaly fixed the problem was a clean install.

by wcp

You did not comment on my "Replace the video card". If you have not done it yet, please do so.

by wcp

Boot to Safe mode. If the mouse works well, we know the mouse or virus is not causing the problem.

by pinoy_teknik

Is this happen if you are connected to the Network?

Try to disconnect the UTP cable at the back pannel of the PC to make sure that it is done by the Remote Administration Software. And W2k has built-in Remote Access.

And if that is absolute reason......

Close the background application...
You can find this when pressing CTRL-ALT-Delete.

And other is Disable the Remote Access Service of your Windows 2000, if that is enable.
To do this...

Start>-->Program>-->Administrative ToolsThen change the configuration of the RAS
And if you are new to RAS, take a search to MS using the Keywork RAS or other..
http://support.microsoft.com/default.aspx

__________
Pinoy_Teknik
http://kickme.to/flaire

by danprem

If none of the above answer work, then u might as well try using a virtual pet cat.

That should keep an unruly mouse in check ;)

by gperrie

I used to get this problem on quite old PCs (IBMs I think) running Win95. Wiggling the mouse would cause the pointer to go to 3 or 4 different positions on the screen and have the same effect as right or left clicking. Sometimes it would open the Start menu and then the next click would open some program then some properties etc. Hitting the keyboard in frustration would sometimes make it go back to operating normally!!

This sounds the same sort of problem.

The problem was (eventually)diagnosed as a problem with the BIOS. Can't remember why we couldn't flash this BIOS but IBM ended up replacing all the motherboards that showed these symptoms.

Gavin

by dklippert

Try a different mouse. Sometimes a damaged cord will do this.
Also switch the keyboard if the problem continues.
Check for viruses.

by joe

I have heard of a joke program somewhere in Tech. Check your config for something on startup configuration that does not belong there.
Good luck

by mightyyoungfai

i use to have this kind of problem,
1. try to change the mouse using com port and p/s2(using new mouse). if the com port works and p/s2 won't, you are facing with motherboard failure.
2. if both also can't try to scan for viruses, or even the worse you can always try to fresh install your computer

hope this help!

by inmedia48

After replacing the mouse and scaning every file for virus' what finaly fixed the problem was a clean install.

by cg it

Well, I've read just about every type of answer there is concerning a abberant mouse (including getting a virtual cat). Since you say it's a basic mouse no extra drivers are needed, are you sure?. And you failed to mention is it's a USB mouse or onethat connects to the motherboard mouse port or you have it connected to a serial port. I like the answer for getting a cat.( There is that cute cat Felix program)....

by cg it

And! basic mouse no extra drivers needed means your using the O/S mouse drv files. Could be their corrupted. Try loading in some basic mouse drivers instead of relying on the O/S drivers. If your mouse still jumps around...Get the cat.

by inmedia48

After replacing the mouse and scaning every file for virus' what finaly fixed the problem was a clean install.

This discussion is closed to new replies.