Question Locked

My PDC doesnt show computers in network neighborhood?

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
This is a problem Ive been having thats been causing me alot of headaches. I have a single 2k3 domain controller running my DHCP and DNS. The problem is when I go to network places the domain itself shows up but when i click it doesnt show any computere. It also does not show the unsecured workgroup thats on the same network. On all of the hosts Im able to browse to other computers through network places EXCEPT the DC. This is driving me crazy as the DC also hosts our FTP and it makes it a pain to map directories to our file server. Any thoughts?

10 replies

by p.j.hutchison

Maybe you need to configure WINS so the Netbios names show up in My Network Places.

by p.j.hutchison

You need to install the Windows Internet
Naming Service on your Windows server and
change DHCP server options to point to wins
server. This will store the netbios names
in a database and will allow netbios name
resolution, unless you are using 'Netbios
over TCPIP' option on your DHCP scopes.
You can install it via Add/Remove Windows
Products in the Networking section.

by downrighttired

what i dont understand is why my DC is the only one not showing anything in network places. All the host can see each other, only my DC is isolated (it cant see them, they cant see it), it also does not list the workgroup thats on the network.

by cg it

normally you don't want your AD DC appearing in my network places. Its not necessary for users to see the DC to logon. It's just necessary for the sysvol and netlogon share to be accessible to users via permissions. They don't actually have to see the shared folder.

However, if you are sharing a resource on your DC for users and it's listed in AD, users can browse AD for the resource.

by downrighttired

you remember that was initially my problem; was not being able to see the DC from the hosts. Thats still a problem but one I can deal with. The problem NOW is that from my DC i cannot see the other hosts in my domain. So it makes it difficult to lets say point my ftp to a directory on another computer. And impossible to do so if the computer is on a workgroup, as none of the workgroups show up on my DC under Microsoft Windows Network (nor can i find the workgroup computers by searching..?? Could it be a WINS problem like the other poster said? If so why is my DC the only one having this problem. All other hosts recieve their net settings from the DC.

by p.j.hutchison

Computer browsing uses Netbios names, not dns. For it to work, if all computers are on the same subnet, then you should be able to see all computers on the same subnet as it will be using ARP.

Computers and servers need the Computer Browser, Server and Workstation services running otherwise no computers will be available to browse or it will not be available to browse for.

WINS is useful for multi-subnet networks and multiple domains and workgroups and for short name resolution.

USeful tools: BROWSTAT.EXE, NBTSTAT.EXE
(you may have to download browstat as its not a tool provided in XP).

by cg it

domain controller [DC] intimates that you have a domain based network. Active Directory Services are the base concept of a Windows domain.

A workgroup isn't a domain based network nor does it have a domain controller.

so, using a DC and the term workgroup together doesn't quite make sense.

WINS server is really used for finding and resolving machine names to addresses for pre W2K and non Windows hosts. Operates like a Hosts file. In a pure TCP/IP environment using W2K or above O/Ss NetBios over TCP/IP isn't necessary [nor is a WINS server]. DNS with forward and reverse lookup zones takes the place of a WINS server.

need more information on your basic network setup. If this a Active Directory domain or just a plain workgroup [peer to peer]. do you run DHCP and DNS? how are those configured? what client O/Ss are there on the network[preW2K]?

by downrighttired

Should have clarified that a little. We have an Active Directory domain running. On that same network/subnet we have an unsecured workgroup that we use for personal laptops so as not to have to join them to a domain. This works fine when someone on their work PC needs to pull a file off of their laptop or something like that. We also have a offsite backup NAS device that is on this workgroup (in an adjacent building). As its a small tight knit office we allow employees to store some files there as well. AS I said all this works flawlessly from the hosts PCs, but from the domain controller I cant pull files from a workgroup or navigate to the offsite backup for storage.

This discussion is closed to new replies.