Discussion Locked

need monitor driver

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello.
I have a 14 inch monitor. The make is CMVS 1439 from STD COMPUTER INC (Comoupartner)
I reinstalled Win98 and hot the image is hazy.
What can the problem be?
I do not have the monitor driver and was looking for it on the internet.
Pleasehelp.
fndomnic@juno.com
Thanks.

13 replies

by dmiles

Troubleshooting monitor display problems by opening the Display Properties and checking to see if the monitor is listed,then install the monitor drivers manually

Install by selecting Add New Hardware and selecting the manufacturer from the left pane,select the model from the right pane and then click OK.
It should install the driver from the Windows 98 disk

Other sites to search for driver

1)www.drivershq.com
2)www.drivers.com
3)www.driverforum.com

by thechas

Hi,

Check your e-mail. I sent a replay there to your peer directory e-mail.

Chas

by europanorama

i guess you need no driver. they are only for color-calibration and not for your problem if you see a bad picture. you will have to enter windows by using safe mode. push f8 when starting. click right mouse button on desktop. under options/settings you will see low resolution of 480x640. set ok and it will be changed for standard start. then restart. then restart again and do the same as mentioned but use higher resolution(on win.3x-machines 600x800, on win9x 768x1024. if you try changing higher color-settings at left side, system will tell you which one it accepts by rejecting at a certain level.

by lester_stidham_2000

One sure way to have the monitor the way yo like is to purchase a vedio card such as RADEON7000 AGP4X/2X 32mb...for more infomation check out the site www.ati.com Will work in compatable pc's for any monitor

This discussion is closed to new replies.