General discussion

Locked

Network connection problem

By stevebarra ·
We have just recieved a new computer to run on our NT 4 network,the OS system is WIN98.The network is using TCP/IP and DHCP but when opening network neighborhood I cannot connect to any other computers running win98.The computers running win95 connect ok and the other machines running win98 can see each other,I can ping from the 95 computers ok and to the NT server but get no responce when trying the 98 ones.
Steve

This conversation is currently closed to new comments.

9 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Network connection problem

by Seeker2000 In reply to Network connection proble ...

What is the error code you get here, IS there a master browser conflict? If so Enable file and printer in the network neiborhood properties box for a short time to make some changes. after enabling sharing and rebooting go back to network neiborhoodproperties and scroll to the bottom in th dialog box. Here double click file and printer sharing.This will bring you to the advanced dialog box. Here you want to disable Masterbrowser and enable LMHOST. reboot and try this.
There are a few other problems hooking up 98, one way to take care of some of them is to make sure you have gone to windows update page. This may help or solve your problem.
If you get error codes, add them to your question.

Collapse -

Network connection problem

by stevebarra In reply to Network connection proble ...

Poster rated this answer

Collapse -

Network connection problem

by scottsman In reply to Network connection proble ...

Start with the basics. Check network drop and cable. Will a known working pc work on that drop? run winipcfg ...is dhcp working for this pc? do you have green/yellow light on nic showing a connection? if all these things are in order than I would look at the other post and perhaps reinstall nic driver

Collapse -

Network connection problem

by stevebarra In reply to Network connection proble ...

I have swiched pc's on that drop and cable(also switched cable) but still have the same problem.

Collapse -

Network connection problem

by b_d_p In reply to Network connection proble ...

If you can ping the issue should not be related to the hardware. What about the Domain or Workgroup settings for this PC? Also, if the DHCP is working correctly check to make sure the PC is also using / receiving the correct Subnet Mask, etc.

Collapse -

Network connection problem

by stevebarra In reply to Network connection proble ...

Poster rated this answer

Collapse -

Network connection problem

by FRock222 In reply to Network connection proble ...

Also check to see what protocals are in the stack of course tcp/ip add netbuei if it is not there.

Collapse -

Network connection problem

by stevebarra In reply to Network connection proble ...

Tried adding Netbuei and using that but no joy.

Collapse -

Network connection problem

by stevebarra In reply to Network connection proble ...

This question was closed by the author

Back to Desktop Forum
9 total posts (Page 1 of 1)  

Related Discussions

Related Forums