Discussion Locked

Network Design for Webserver

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi,

our company is planning to have webserver, using .asp. in fact we already had a dsl connection and also 6 public IP address. we also had a dsl modem router for the internet connection and already installed a windows 2000 advance server in one of the computers.

my question, how do i design my network? i mean from the internet to the dsl/router then to the webserver. Can anyone give me any ideas what is the proper network design for creating a webserver? and since were using windows 2000 server, we all know now a days that microsoft is very vulnerable to viruses, spywares. how about security in setting up this webserver?

right now were stuck to this network design problem. Any help from you guys are very much appreciated. thanks in advance.

Vaikz, Philippines

4 replies

by cg it

well you answered your own question. The design would be Internet to DSL Router to the web server for web page requests. The web server then sends the web pages in this order: web server to DSL Router to Internet. It really is that easy.

If your worried about viruses, spywares and the lot, don't use Windows server use a Linux server.

by toivo talikka

You can set up Microsoft Internet Security and Acceleration (ISA) server, see http://www.microsoft.com/technet/prodtechnol/isa/2000/deploy/isastnin.mspx. The ISA server is then your firewall which forwards HTTP requests from to port 80 on your webserver.

Because of security reasons it is best to install the webserver on a different box than your firewall, or other servers.

If you have three network cards in the firewall, you can keep the LAN, e.g. subnet 192.168.3.0, separate from your DMZ, e.g. subnet 192.168.2.0, where the webserver should reside.

The firewall redirects the requests sent to your public IP address(es) to the internal address(es) of the server(s), e.g. 192.168.2.10.

If you plan to host several sites, you have a number of options, depending on the number of servers. One webserver like Microsoft ISS or Apache can host several domains, where HTTP requests are serviced either based on the IP address on the domain name embedded in the request.

You need to know how the DNS system resolves the domains into the public IP addresses. You can map several domains to one public IP address and then let your webserver direct the requests to the correct document directories.

The purpose of the DMZ is to restrict access from your public servers to your LAN, should the servers get compromised by intruders.

On the other hand, your DSL modem router may already have some firewall functions and it may even have limited support for DMZ.

However, if you have a spare PC (Pentium II up, 96MB RAM) and three network cards, you can build your own firewall by downloading a fully functioning Open Source product Smoothwall Express 2.0, free of charge, from http://smoothwall.org/get. You will need to burn an ISO CD from the 45MB file and boot from it to install the application to a PC.

Smoothwall is administered through its browser interface and it has a lot of features including intrusion detection.

by hal 9000

Also don't forget to update the firmware on the router on a regular basis.

If you want to maintain any semblance of security even with ISA you'll need to have the router/modem constantly up to date with its firmware.

Col

by hozcanhan

Vaikz , study DMZ . Set up a DMZ and put hte web server in the DMZ , not inside the center of your network . Use a firewall , start with reading this site if you wish h**p://www.firewall.cx/dmz.php

This discussion is closed to new replies.