General discussion


Network support

By sangvo ·
hi cisco guru, I need some expert input,in my network I have entera switches with Gb enet 6G306-06 fiber card, as my core switches, and I have cisco switches 3750 as my edge switches, very thing work fine but I have input errors on my cisco interface, I don't know what going on
please help

GigabitEthernet1/0/1 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 0014.f24b.f881 (bia 0014.f24b.f881)
Description: ** UPLINK to w2wp001-4-2 **
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 1000Mb/s, link type is auto, media type is 1000BaseSX SFP
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:06, output hang never
Last clearing of "show interface" counters 03:38:35
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 90000 bits/sec, 57 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
1410925 packets input, 480827389 bytes, 0 no buffer
Received 482585 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
437 input errors, 437 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 410420 multicast, 0 pause input
0 input packets with dribble condition detected
505116 packets output, 61696099 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Comments

Related Discussions

Related Forums