7 replies
by thechas
From the sounds of things, you have a CPU or motherboard problem.
On ATX motherboards, the power supply is controlled by the motherboard.
Also, there is power applied to the motherboard ALL the time. Make sure to unplug, orswitch of power to the power supply before removing parts from the system.
The first thing to check, is if the fan on the CPU turns freely if you spin it by hand.
If the fan sticks, turns hard, or grinds, then replace both the fan and your CPU.
If the CPU fan spins okay, then make sure that your RAM and all plug-in cards are firmly seated in their sockets.
If a new, or known good CPU does not correct the problem, my suspect is the motherboard itself.
One last thing to try, is to remove ALL devices other than the RAM and video card, and see if the motherboard now boots.
If it boots, then shut down, and plug the other devices in 1 at a time until you find the bad device.
Chas
by dmurphyg
by gmatov
With your new power supply, first it has to be turned ON before plugging the power cord in, per Antec. I sent dead PS's back for replacement, got "dead" one for return, called to complain, and tech told me to unplug drives, remove "reset sw" from board pinout header, and short the pins. That retrains the PS or something. Anyhow, it has worked twice for me. Now that I know this I wish I hadn't sent the others back before trying it.
Good luck.
by dmurphyg
by cg it
by dmurphyg
by dmurphyg
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending