OK, now it's my turn for needing help........
This is page 2 of the discussion. Read the opening post
Networks
This is page 2 of the discussion. Read the opening post
by thumbsup2 Accepted solution
by rob miners Accepted solution
by rob miners Accepted solution
by thumbsup2 Accepted solution
I've seen some very strange things going on around here lately.... Yours is just another gremlin which haunts the site.
Those gremlins are crafty too! Go ahead... I dare ya... try to recreate the problem so you can report it to the PTB's! If you can't recreate it, they'll think you've gone off the deep end.... again! ;)
by betageek52 Accepted solution
I'd be lying if I did; But I usually uninstall that POS because I hate it launching at startup. I'm funny like that because I'm really 'retentive' when it comes to the boot sequence.
by rob miners Accepted solution
that's just it. As soon as you try to recreate the problem it will work. Well most of the time anyway. ;)
Talk about gremlins. I have a System that I have recently added a new PSU to as the old one was faulty. To cut a long story short it wouldn't post after a couple of days. All fans were spinning but there was no-one home. I decided to use a Post Card to see if I could determine where it was failing. Inserted the Post Card and hit the power button. Lo and behold it fired up. I'm using the System now to make this post. It is going to be interesting to do a shutdown to see what happens. ;)
by thumbsup2 Accepted solution
... Sometimes, you just need a bigger hammer! ;)
The physical act of plugging in the POST card may have cleaned or seated something that needed to be cleaned/seated! :D
Don't ya just love gremlins? ;)
by rob miners Accepted solution
by oh smeg Accepted solution
The Gremlins don't like you cleaning out their home. They get nasty when you do things that they don't like.
Currently I think that I have this womans PC working well it has for 3 days now without a glitch but I can almost guarantee that the moment that I hand it back it's going to fall over again and play up. :(
But I'm not sure what else to try here short of a Reload.
Col
by rob miners Accepted solution
by thumbsup2 Accepted solution
... After using the hammer, the problem is either fixed... or it's truly broken and needs to be replaced. There's no in-between to give the gremlins a place to hide! ;)
Danged good tool, that hammer! :D
by rob miners Accepted solution
by the scummy one Accepted solution
by thumbsup2 Accepted solution
At least that keeps it from rebooting so you can SEE the danged BSOD.
What does your intuition tell you about it? Use the Force, Luke! ;)
by deepsand Accepted solution
I've had similar problems with GoToMyPC. I've pretty much been able to work around such by installing the free version of LogMeIn on the GTMP clients.
Although the free LMI lacks any file transfer or remote printing capabilities, it does have a "hard reboot" option, which allows me to force the client machine to do a cold reboot, after which I can then re-establish a GTMP session.
by seanferd Accepted solution
I was never quite sure what the point of InCD and the other "extras" to Nero, et al were for. Why do I need a separate packet-writing app with the burning software? (Oh, wait, it's because Nero is a PITA half the time as well, I suppose.) I had to blow that off a couple of systems, then fix the ASPI layer. I had no idea it caused these other issues, though.
I'm surprised it is still around. I never installed the stupid extras myself, then ditched Nero entirely for other free apps. And I never had one bit of trouble with the various Linux burning apps - I used to boot into RH9 whenever I wanted to write a CD.
by rob miners Accepted solution
by seanferd Accepted solution
I do believe you are right, there. I never really thought about it, but everything after 6 seemed to get larger, with extra "functionality", but without any perceivable advantage (to me). Prior to 6, it did seem even buggier.
And Nero never plays nice with any other installed burning software, one or the other always breaks. Strangely, I've installed 3 or 4 other burning apps at the same time with no problem (for testing, or opening an image unsupported by other apps).
I think you have made an accurate assessment, my friend. It certainly crystallized my experience into one sentence! :D
by betageek52 Accepted solution
by the scummy one Accepted solution
I had a system that refused to post unless you touched the top of the case -- with anything. It wasnt a weight thing either, and no current was there. it really didnt matter what was put on top, as long as it wasnt there when it shut down.
That was one interesting beast
Ran fine for 5 yrs, before I upgraded it.
by betageek52 Accepted solution
I almost always use the BartPE disc. It can read and edit all the stuff you can get to, and will help to get things back on track.
(I always seem to be a day late and a dollar short on my posting Ideas!)
by oh smeg Accepted solution
Was just as effective.
If it didn't work first time after I poured 2 gallons of Sea Water through it, if it didn't work after that there was something wrong with it. :D
Worked every time too I might add. :0
Col
by the scummy one Accepted solution
by rob miners Accepted solution
by rob miners Accepted solution
by oh smeg Accepted solution
2 Gallons of Untreated Sewer Water is hard to get into a Main Frame Environment.
Bottled water on the other hand isn't. :p
Col 0:-)
by the scummy one Accepted solution
home made mocha or something :^0
Heck, maybe security may want a taste as well :^0 :^0
Once they are gagging, you can run for it :D
by seanferd Accepted solution
http://blogs.technet.com/markrussinovich/archive/2009/08/10/3272210.aspx
Edit: Just to note that it is an entirely different bit of Citrix code involved in the article - just made me think of this thread for some reason. ;)
by rob miners Accepted solution
This discussion is closed to new replies.
Sort by Trending