Discussion Locked
0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently built a Pentium 4 1.8GHz PC with 256MB RAM, hard drive, floppy, CD-ROM and CD-RW. I am running Windows ME. Approximately every 10 boots or so, I will receive one long continuous beep and the PC will not boot unless I do a restart. The PC then boots normally and everything is fine. I have read that this might signal a problem with the power supply? Other than this one issue, I have no other problems, the PC performs well. Does anyone have any ideas on what I need to be checking?Thanks for your help.
11 replies
by dmiles
The BIOS manufacturer will be the determining factor of the Beep Code
One long beep will usually indicate a Power Supply or Motherboard problem
Check the power supply connection to the motherbaord to make sure the connector is set on the connector properly
Then try checking the Video card to make sure that it is seated properly in slot.
by joanneg
The question was auto-closed by TechRepublic
by widgeen
I've had this problem happen when there was a "sticky" power on switch
by joanneg
The question was auto-closed by TechRepublic
by jailbreak
maybe is a overheat of the CPU or motherboard.
go to bios setup and see the heat overall
by joanneg
The question was auto-closed by TechRepublic
by joanneg
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending
Discussion
How to make light speed agent go away
0 helpful
4 replies
Question
Floppy drive wont work on my 486
0 helpful
1 reply
0 helpful
1 reply
Discussion Locked
Ryzen 7 7700
0 helpful
2 replies
Question Locked
Issue fully resetting my PC
0 helpful
4 replies