Desktop

Ask something
Discussion Locked

OS Installation

0 helpful
1 reply

by pena_ng

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
It's been difficult to instal windows NT 4 on my system and the system is not seeing the 20 gb hard disk

1 reply

by ann777

Windows NT will first only install on a 4 or 8 GB partition. Install it there, then install service pack 3, then use disk manager to enlarge the partition to full size.

If WinNT does not see any of the hdd, then make sure that the bios is set properly and see if you can see the hdd in the startup of the computer. If yes, then using the 3 NT bootdisks, run through the setup. If no, then check into the hdd itself. Do you know if it is operational? Is it new/old? etc.

I'm not sure what your question is here? You will need to provide a bit more detail as to what the problem is.

This discussion is closed to new replies.