Networks

Ask something
Question Locked

OSPF and RIPv2 convergence

0 helpful
3 replies

by musrosine

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I am comparing convergence time of OSPF and RIPv2 in the network of seven routers. All routers are in the same area (area 0).
Can any one please, tell me why OSPF is having slow convergence than RIPv2.
Cheers.

3 replies

by musrosine

Thank you for your help.
Here are configuration I made on one router. I am not sure if the reverse mask are correct.
Thank you.

conf t
hostname CHD
interface FastEthernet0/0
ip address 172.16.3.7 255.255.255.0
no shutdown
exit

interface FastEthernet0/1
ip address 172.16.2.8 255.255.255.0
no shutdown
exit

interface Serial0/0/1
bandwidth 64
ip address 192.168.1.8 255.255.255.0
clock rate 64000
no shutdown
exit

interface Serial0/0/0
bandwidth 64
ip address 172.16.7.8 255.255.255.0
clock rate 64000
no shutdown
exit

router ospf 1
network 172.16.2.0 0.0.0.255 area 0
network 172.16.3.0 0.0.0.255 area 0
network 172.16.7.0 0.0.0.255 area 0
network 192.168.1.0 0.0.0.255 area 0
exit

This discussion is closed to new replies.