Question

Locked

pc to pc networking

By alexz_s02 ·
is there somebody could teach me how to configure utp wire in setting up pc to pc networking without using routers etc.,

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

2 options

by bsmith523 In reply to pc to pc networking

1) Get what is called a crossover cable. This is a special ethernet cable that connects 2 computers directly. It looks like a standard ethernet cable but the wires inside are arranged differently. Make sure it says crossover. Then set the network address of both computers to have similar addresses. i.e. 123.45.67.1 and 123.45.67.2 and have the same workgroup name.

2) You can also go buy a special USB cable that can accomplish the same task. No network setting needed. Go look in your local computer store and you should be able to find it.

Collapse -

Don't Bother

by rkuhn In reply to pc to pc networking

You can buy brand name (like D-Link) switches and hubs for like $10-$20. Then you can connect more than 2.

Collapse -

wikipedia has a good pin out for crossover cable

by sgt_shultz In reply to Don't Bother

http://en.wikipedia.org/wiki/Ethernet_crossover_cable

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums