General discussion


pix firewall outside & inside interface is not communicate eith each other

By luhar.leo ·
pix 520 inside traffic is not pass through outside interface.& outside traffic is also not pass through inside.

so,plz help me....?
give me some advice...

wr t

Building configuration...

: Saved


PIX Version 4.4(1)

nameif ethernet0 outside security0

nameif ethernet1 inside security100

nameif ethernet2 pix/intf2 security10

enable password 8Ry2YjIyt7RRXU24 encrypted

passwd 2KFQnbNIdI.2KYOU encrypted

hostname pixfirewall

fixup protocol ftp 21

fixup protocol http 80

fixup protocol smtp 25

fixup protocol h323 1720

fixup protocol rsh 514

fixup protocol sqlnet 1521


pager lines 24

no logging timestamp

no logging console

no logging monitor

no logging buffered

no logging trap

logging facility 20

<--- More --->

interface ethernet0 auto

interface ethernet1 auto

interface ethernet2 auto

mtu outside 1500

mtu inside 1500

mtu pix/intf2 1500

ip address outside

ip address inside

ip address pix/intf2

no failover

failover timeout 0:00:00

failover ip address outside

failover ip address inside

failover ip address pix/intf2

arp timeout 14400

nat (inside) 0 0 0

conduit permit icmp any any

no rip outside passive

no rip outside default

no rip inside passive

no rip inside default

no rip pix/intf2 passive

no rip pix/intf2 default

route outside x.x.x.x 1

<--- More --->

route inside y.y.y.y 1

timeout xlate 3:00:00 conn 1:00:00 half-closed 0:10:00 udp 0:02:00

timeout rpc 0:10:00 h323 0:05:00

timeout uauth 0:05:00 absolute

aaa-server TACACS+ protocol tacacs+

aaa-server RADIUS protocol radius

no snmp-server location

no snmp-server contact

snmp-server community public

no snmp-server enable traps

telnet timeout 5

terminal width 80


: end



This conversation is currently closed to new comments.

0 total posts (Page 1 of 1)  
Thread display: Collapse - | Expand +

All Comments

Back to Networks Forum
0 total posts (Page 1 of 1)  

Related Discussions

Related Forums