Discussion Locked

Power resistance on motherboards

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I was at this client's location looking at a computer that had been loaded with additional devices.(CDROM READER & DVD and other stuff) When I first booted the computer all the icons changed color or there was no icon just an horizotal line for an icon and it was not responding to the mouse. I could not make up the problem because I was told that it had enough RAM, Windows has been reloaded and no sign hardware conflicts. The bottom line was that another tech had tested the motherboard and the problem was high voltage. I could not find the tech to ask how do I go about testing the hardware since I really did not know how to diagnose the problem. can somebody tell me?

2 replies

by hawgfan

The only voltage I can think of that would cause issues if it were high would be the cpu voltage. On some mobos this is adjustable by jumper settings. If yours is not, you will have to replace your mobo, however, I doubt this is your problem.

by thechas

It is possible that there is a problem with the CPU core voltage regulator, or the user had set it too high. (A common trick for over-clocking.)
Make sure that the jumpers or BIOS settings for the CPU core voltage are correct.

If the core voltage was set high for a period of time, the CPU may be toast, as it WILL run extra hot with a high core voltage.

Another possibility, is that this is from the lot of motherboards built with a bad batch of electrolytic capacitors.

Take a close lookat the caps near the CPU.
If any are bulged, or show signs of liquid leakage, the caps are bad.
This puts the CPU, RAM, and motherboard into question as to if they are reliable or not.

Chas

This discussion is closed to new replies.