Desktop
by warbuckle
Hello,
Do you see the POST operations on the screen?.........or just no screen at all?
Could be a fried video card / Monitor, switch out the card and try it. If that does not work get a friend's monitor and try it......
Will
by thechas
Check the beep codes for your motherboard.
There is a TR download of BIOS beep codes.
I would start with a monitor swap.
However, depending on how your power supply failed, it may have damaged any of the connected parts.
If the power outage was precipitated by a lightning storm, I would next remove the modem.
While you have the case open, look closely at all the boards. You are looking for bulged or burned parts.
If you find any, that card is bad, and needs to be replaced.
Chas
by fred07
Hi,
Continuos beeping,
1, No video signal found, card or monitor damaged
2, No ram found or bad ram
3, No cpu found or bad cpu
As TheChas said, try different monitor and card
and then try different ram and then cpu.
If MB beeping it is probably working.
This discussion is closed to new replies.
Sort by Trending