General discussion

Locked

Printer print garbage

By choy.waigiat ·
I'm using a Seikosha BP9000 printer on a LAN. PC which are using this printer are printing garbage. It prints one line of garbage then goes to a new page and print garbage, repeating the same process.

I did a windows print test page on 2 PCs and the same problem happen.

anyone can advise?

thanks and regards,

This conversation is currently closed to new comments.

6 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by HAL 9000 Moderator In reply to Printer print garbage

Sounds very much like the Printer Drivers have become corrupted so remove the printer and reinstall the drivers on every affected computer. Provided that there is nothing mechanically wrong with the printer that should cure your problem.

Col

Collapse -

by choy.waigiat In reply to

Its a emulation problem

Collapse -

by Greybeard770 In reply to Printer print garbage

This does scream of being driver related. I have seen similar results when sending inkjet commands to a laserjet printer. Sometimes it appears that you get a couple of printed pages followed by LOTS of blanks because the LineFeed is being processes but the CarriageReturn is not. Replace the driver.

Collapse -

by choy.waigiat In reply to

Its a emulation problem

Collapse -

by choy.waigiat In reply to Printer print garbage

This question was closed by the author

Collapse -

Sieko Precision BP-9000 prints garbage

by beyerse In reply to

Have you sorted it out?I have the same problem. When I install the driver it works for about 10 min and then suddenly it starts to print garbage.

Back to Desktop Forum
6 total posts (Page 1 of 1)  

Related Discussions

Related Forums