General discussion

Locked

privilege levels for http server switch

By kamal.yadav ·
i used the commad archive and extraced the tar file. using the ip http authentication enable, i can use web interface with secret password ( level 15 access) . i cannot do this with local username/password combo or tacacs+ authentication. one of the configuratuion i tried was-username ky privilege level 7 password cisco
enable secret level 7 cisco1
privilege exec level 7 configure terminal
privilege configure level 7 interface
i am unable to access with this username.
i also tried using tacacs+ configuration ( with checking shell (exec) and privilege 7)
can you throw some light or guide me to a good book on this subject
thanks for your time

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by mshavrov In reply to privilege levels for http ...

Default authentication for HTTP is "enable" password. You may change this by the following command:

ip http auth local

or

ip http auth tacacs

Also you may telnet into your switch, and do "debug ip http auth" to see what's going on when you are trying to authenticate through the Web.

Back to Networks Forum
1 total post (Page 1 of 1)  

Related Discussions

Related Forums