Discussion Locked

Problem with new USB port in PCI slot

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I've been given a Lexmark printer, and needed a USB port to link it with my PC. Having bought the USB and driver, I found that, no matter which PCI slot I use, nothing works, and I mean nothing!! Once the USB is put into ANY of the PCI slots, and the PC rebooted, not even the monitor will come on. I'm using Win98 2nd edition, on an old office PC given to me by my brother in law. Any help would be greatfully received! Also, seeing as I only have 1 gig hard-drive, how easy is it to upgrade?

2 replies

by thechas

If the system configuration is as I expect, your best option is a newer PC.

With a 1GB hard drive, I suspect that at best you have a 166MHz non-MMX CPU.

For under $100, you can buy used systems that are 300 MHz PII and better.

I suspect that there is a conflict between the BIOS on the USB card, and the BIOS on the motherboard. It is even possible that the motherboard is NOT plug and play.

Otherwise, it could be that your PC does not meet the minimum hardware requirements for the USB card, and that is causing the lock-up.

As to changing hard drives, the 'best' way for an older system is to start over fresh and install Windows and application programs onto the new drive.
Then, copy over your data files from the old drive.
Be aware, that many older PCs have limits on the size of hard drive that they can recognize.
2.1, and 8.4 GB are common size limits on older PCs.
There are work-arounds, such as drive overlay programs (these are on floppy disks that come with most retail drives) and PCI IDE controller cards.

Chas

by jardinier

Is it a USB-1 or USB-2 card? The reason I ask is that a friend recently encountered a similar problem. He won a printer and scanner as a door prize, but both required USB ports.
I purchased a USB-1 card, installed it in a Pentium 133 running Windows 98, and everything worked fine. I also upgraded his RAM to 96 MB.
If your HD is 1 GB, then your CPU would most likely be no faster than Pentium 100.
While I don't pretend to be able to answer your question absolutely, I thought this information might be of some use to you.

This discussion is closed to new replies.