Question Locked

Problem with Wireless network connection and booting of vista

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi members,

I bought a laptop 3 months ago,Lenovo Y410 series, which has 160 GB HDD and 1GB ram. On my laptop i have two operating systems -
Windows 2003 server SP1 (Enterprise edition - 32 bit)and Windows Vista basic

Some weeks back when i was going through my email, on Vista OS, i received windows update and which i have selected to update the windows. Upon the installing the updates the laptop was hanged up and had to shut it down forcefully by pressing the power button for 10secs. When I started to switch on the laptop the next day I started facing the problems -

1. When I selected my Vista OS out of the two OS the laptop screen is showing message "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: insert windows installation disc and restart and select repair your computer.

Other options: If power interrupted during startup, choose start windows normally.
Safe mode
safe mode with networking
safe mode with command prompt
last known good configuration
start windows normally"

Upon selecting start windows normally or any of the above options, the screen showing loading and then the screen goes black and then it gives me the initial options select the OS.

2. When I am using Windows server 2003 OS i am unable to view web pages, even though I am connected to my wireless network. My wireless shows signal strength as excellent and connected to net.

Can anyone here help me to solve these problems. Moreover I even tried to reboot the Vista OS with the recovery CD given by lenovo.
Please i am waiting for your help.

5 replies

by Former member

You have two os's on your hdd.
When windows does an update this can cause many problems if you have two os's on one drive.
Hopefully all is well when you do this,
BUT PLEASE DO A BACKUP FIRST.
Put in your Vista DVD disk and then select "repair" when you see the "install" sign (look down to the left of your screen), this will repair what is wrong and inform you if all is ok your system will boot normally, if not do again. Hope all works out for you.

Please post back if you have anymore problems or questions.

by raghavendra_thota

Hi,

Thanks for reply.

I have my backup in my DVD.
The thing is my laptop was partitioned into 3 C,D,F. But, how can one recognize which local disk has Windows server or Vista.

Moreover, if i repair Vista won't my partition get changed! because I do not want to reinstall Server 2003 and software related to it.

by subarathi04

hello friend,

i found that u r facing some problems due to win update. in win os during installation if there is any interrupt or not installed properly this type of prob may occurs. plz try this it may help u

boot your system by safemode by presssing f8 key while starting and restore your system for early days.

by computercookie

which drive has W2K3 or Vista on it, the disk will only repair a valid Vista install.

To find out which drive I suggest you boot to W2K3 and open 'My Computer', the drives, those with a windows folder are the ones that contain an operating system. If you right click on the windows folder and select properties this will tell the size of the windows folder. in the case of Vista, this will exceed 10 GB, the W2K3 should be approx. 2.5GB.

Once you have identified what OS is on the disk go back to 'My Computer' and right click on it and select rename e.g. Vista or W2K3, I'd also think that the Laptop my have a restore drive, this is why you have three partitions.

As for the connection of W2K3, I'd suggest you look at the properties of IE, if you have turned of all alerts and the settings only allow HTTPS: connections this may be the problem.

Post back with more details if you have any questions regarding this problem.

This discussion is closed to new replies.