Question Locked

Problems with LAN, can't connect computer to network

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've got a problem with connecting a computer on a local LAN. I administer about 10 computers running Windows XP SP2 that are connected to a server running SUSE 9. I have a problem, I recently added this older computer on the network, and couldn't do so no matter what I tried, other computers could see it on the network, they can all ping each other, but none can access its shared files/folders, while the old computer can access other computers. I get the windows message that I don't have permission to access this network file.

Details of what I did follow, but let me just say that I was willing to sweep this one under the rug until had to reinstall this one computer that WAS fully working and sharing on the network, and then after the reinstallation, I got the same problem, so I am desperate to solve this.

* file & printer sharing - on
* all computers in same network/workgroup
* added windows firewall exceptions
* LAN Properties > TCP/IP Properties > Advanced > WINS > Enable NetBios - yes
* My Docs > Share -> Permissions -> Everyone - enabled everything in this shared folder (simple file sharing turned OFF)
* Guest account - enabled and turned on
* in the end I went to regedit:
HKEY_LOCAL_MACHINE
\SYSTEM
\CurrentControlSet
\Control
\Lsa
value name : restrictanonymous - set to 0
value name : limitblankpassworduse - set to 0
restrictanonymoussam - I didn't want to touch this
* went to Admin.Tools > Local Security Policy > Local Policies > User rights assignments - added Access this computer from network (Everyone)
* Local Security Policy > Local Policies > Security Options - on Network Access checked everything, seemed fine

I also searched online and saw that enabling/installing NWLink IPX/SPX/NetBIOS Compatible Transport Control Protocol solved the same problem for other people, but I am still at loss here. It is quite possible that it is something small and ridiculously simple that I've overlooked... :( Please help!

2 replies

by charker

Hi i have looked through your settings they look fine, i can tell you that i had the same problem with vista, i got around this problem by making the network private, if the node is limited access it will not let you in, hope this helped, Chris Charker

This discussion is closed to new replies.