Discussion Locked

quality of burnt music cd

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have 3 cdroms. 1st. regular cdr 2nd. yamha cdrw
3rd. LG cdrw. the cpu is AMD
making copy of music cd (original in regular cdr)
the quality of the burnt cd is poor. when i play it the sound is not as nice as the original and have problem withthe bass(low freq.)
i am doing the same on other pc and the resoults much better.
i am getting the same resoults on both cdrws, using X4 speed. also i am using the nero and cd creator
what / where can be the problem
thank you
joe

8 replies

by oz_media

from your post I think you are using a ocuple of PC's.
A few things to look at,
1) Sound card quality and drivers
2) Are you running (the poor quality recording) through an equalizer? This often increases subsonic frequencies and when played back are muddy and distorted.
3) Check the bitrate of the poor quality recording when copying. If it is low, you'll get the double mono effect.

by oz_media

>>i am playing the cdrw on streo audio system
ot on my pc.
Is it copied as MP3 or WAV file?

>>when making copy does the sound card/system
take part in the process?
Depends on the card and the software used. Generally yes, if you have a
soundcard that is older and only capable of double mono or low bitrate
recording your output will suck

>>please adv. how to check the bitrate as you sugested.
What software are you using to rip?

by fred07

Hi,
I have found that certain cd media is very overrated. Some cd media will not do a good copy. I use the durabrand brand which is cheep media with no problem however an A??? as I forget the name is a notoriously p poor for music. I would suggest trying some different brands and if that does not solve the problem Please repost the question in Q&A here.

by opatzg9

One othe rthing to try as well is rip the cd to the hard drive first track by track with a cd ripper and then rebuild the cd adding each track as you go. Generally I've ran into problems if I tried to go from cd to cd-burner when both were on the same ide controller. By using the ripper to move to the hard disk you get the added benefit of the hard disk caching to maintain your data stream. Good Luck!

This discussion is closed to new replies.