Question Locked

Remote Desktop Tunneling over VPN in Billion Router 7500G

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi Guys,
Can anyone show me which ports should be open in Billion Router 7500G for Remote Desktop Tunneling over VPN to SBS R2, to allow WinXp clients to connect to File Server at work?
When I connect I get error code 721,718 & 735
Any help will be appreciated.
thanks

3 replies

by Former member

Error 718:
Error 718 can also occur if your ISP account has expired, or if the username or password you are using is invalid. Error 718 can occur if you have LCP extensions enabled in the TCP/IP Properties of the connectoid and your ISP does not support LCP extensions.

Error 718 may also occur if you have one or more network cards in your machine, and the cards do not have TCP/IP protocol enabled, or if the TCP/IP settings are incorrect. (Go to Networking in Control Panel to examine the properties of your network adapters; or, if you are not using the network card(s), disable them in Control Panel->System->Hardware.)

Error 721:
Error 721 generally means that there is a problem with the remote PPP - the PPP server resides with the Internet / broadband provider and is the computer at 'the other end of the line' that establishes connections to the Internet. The majority of Error 721 messages are caused by a 'problem' with the Internet service provider. Most Internet service providers have a number that can be called to check their service status. With Error 721 problems, it is therefore worth checking the ISP's service status before checking other possible causes.

Another possible cause of Error 721 messages can be displaced modem connections, adsl cables and / or broadband filters. If an Error 721 message has not been caused by the ISP, it would be prudent to check all such connections. Common advice is then to shut down both modem and PC and to wait 5-10 minutes before restarting them. Wait until all PC application have fully loaded before attempting to reconnect to the Internet.

Error 735:
The requested address was rejected by server.
Make sure you don't setup static IP on the VPN client and let the VPN server assign IP.

A PPTP connection will fail if the firewall/router blocks GRE, which is IP protocol 47, and you may receive error 721. If your router does not mention GRE by name or by IP protocol number, look for switches like PPTP pass-through or PPTP Forwarding or even VPN pass-through mode. In some routers, you may have an option to open other ports.

To use VPN, you may need to open port 42 for name resolution.

Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.

This discussion is closed to new replies.