Question Locked

Removing proxy settings via GP

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My network has a proxy server configured. This proxy server is down, and is also unnesessary, due to the new firewall I have in place. None of my clients that were configured (by my oh-so incompetent predecessor) to use this proxy server can access the internet. This is because I am assuming the proxy settings for the clients were manually entered. I have tried setting no proxy via GP under User Configuration->Windows Settings->Internet Explorer Maintenance->Connection->Proxy Settings. This policy is being applied to my clients. However, even with auto detect settings disabled and no proxy settings entered via GP my clients are still looking to hit my proxy server before they hit the internet. What would be the best way to remove these proxy settings from my clients network wide so they can access the internet. I'm sort of time pressed to get the clients up on the web. THANK YOU much in advance.

6 replies

by ronaldsmitty

Well since the Global Group Policy has precedence over the Local Group Policy I would try this. Go into the Global Group Policy under User Configuration - Windows Settings - Internet Explorer Maintenance - Connection. Then under proxy settings, check the enable proxy and put in an IP for HTTP then click OK. Then close out of GPO and wait 5 or 10 minutes. Go back in and uncheck the enable proxy settings. This worked for me.

by cg it

apply the GP to computer settings as well.

you can enable, disable or not configured the GP settings for proxy information in Internet Explorer.

I'd use the not configured settings [which are the default domain policy].

If anything, I'd just disable the GPO all together and let the default domain policy apply which as mentioned above, is no proxy configuration at all.

by shasca

Have you run a gpresult from one of the affected PC's to see what GPO is being applied. Might give you some more info to work with.

This discussion is closed to new replies.