routing question

Question

Creator

Topic
August 17, 2008 at 7:05 am #2153589

routing question

Locked

by scorpion · about 14 years, 5 months ago

i have been having trouble with routing and was hoping for some help as I am stumped.
I have a firewall router at our gateway which hands out ip’s via dhcp – 192.168.1.1
behind this router/firewall(sonicwall) is another pix firewall. pix gets its ip from the sonicwall. pix ip is the 10.1.0.1 range.
we have a lab setup behind the pix, so we wanted to be able to monitor the traffic inbetween the pix and sonicwall.
192.168.1.1 and the 10.1.0.1 can not see each other, both subnets have internet access, but i can not get the subnets connected to be able to ping between each other
i’ve tried setting a static route, but i must be doing something wrong. thank you

This conversation is currently closed to new comments.
Creator

Topic

All Answers

Author

Replies
- August 17, 2008 at 7:05 am #2928410
  
  Clarifications
  
  by scorpion · about 14 years, 5 months ago
  
  In reply to routing question
  
  Clarifications
- August 17, 2008 at 7:16 am #2928404
  
  Read more on your issue here…
  
  by Anonymous · about 14 years, 5 months ago
  
  In reply to routing question
  
  Firewallguide
  
  Please post back if you have any more problems or questions.
Author

Replies

Viewing 1 reply thread

Start or Search

Start New Discussion

This policy describes guidelines your organization can follow to track, process and decommission IT equipment. From the policy: SUMMARY An organization’s IT hardware inventory constitutes a significant capital investment in order to perform company operations. Because hardware represents a critical asset and often holds organizational data, it is important for the company to track each ...

Whether an infection is the result of a disgruntled employee, hardware vulnerability, software-based threat, social engineering penetration, robotic attack or human error, all organizations must be prepared to immediately respond effectively to such an issue if the corresponding damage is to be minimized. Because even the best protected networks become infected, all organizations must have ...

Every operating system should be appropriately secured, especially end user workstations which often contain or permit access to company data and upon which most employee job duties are based. To get the maximum security protection out of your Windows 10 deployments follow this checklist from TechRepublic Premium. Also included in this checklist: Security solutions Product ...

Networks

Question

routing question

All Answers

Clarifications

Read more on your issue here…

Hardware inventory policy

Malware response checklist

Checklist: Securing Windows 10 systems

Cloud data storage policy