2 replies
by rajankanth Accepted solution
by thechas Accepted solution
If your job role is truly PC Support, you are asking a lot of VERY basic questions. Questions that you should know the answer to.
If you don't know the answer to these questions, and have a job support computers, it is past time for some classes. Or at least to read some books.
If all you want is a basic overview, start with the "Dummies" books.
As your need for detailed information grows, I recommend that you take a look at books published by O'Reilly.
Another source would be Realtime Nexus.
http://nexus.realtimepublishers.com/index.htm
We are more than willing to help you understand the specific details on nearly any computer topic.
As to your question,
A parallel port is like a parallel data bus. it has 1 line for each bit in the digital word. In the case of the parallel port on a PC, it is an eight bit wide data bus with additional lines for printer specific hand-shaking and control functions.
A serial port sends the bits of the data word out 1 bit at a time on a single wire.
The PC serial port has both a transmit and a receive data line. For all serial communications, there are protocols and data or Baud rates that must be adhered to in order for the data stream to be properly decoded from bits back into data words.
USB and Fire-Wire are newer and faster serial data protocols.
Chas
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending