Question Locked

Serial to USB adapter issues

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am using a Dell Studio computer in a medical environment, which handles a medical device attached via USB to Serial adapter. There are 2 of these devices connected to this computer. The medical device needs to transmit data to a server.

The problem I am having, is one of the medical device seems to stop transmitting for no apparent reason. Usually a reboot will fix the problem, but this only temporary. I talked to the company that makes the medical device, and they say the problems lies with the USB jumping COM ports.

I have a couple of different PC, but with the same results.

Any suggestions would be helpful.

4 replies

by cg it

Unless this is a desktop and you can put in an serial port expansion card, not much you can do about it.

by older mycroft

At best, any adapter is still just an adapter.

It is only a stop-gap and will never be as efficient as a dedicated protocol.

You need a serial expansion card to be fitted.

by thebofh

Im running 2 usb to rs232 adapters on a single Dell optiplex I have experienced similar problems. Make sure the port number is correct i.e Com 1 and that your software registry setting is pointing to the correct port. Not all devices can run on usb to serial.

This discussion is closed to new replies.