Networks

Ask something
Question Locked

SERVER RAID H.D PROBLEM

0 helpful
2 replies

by djenrie

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Im running a Fujitsu-siemens Primergy tx200 s4
server , when i was setting up some raid configurations via "ServerView" software provided
with F-S server accidental (somehow) a delete a virtual drive from raid setup.

after that i restart the server and now doesn't
find the raid Hard disks.
when power on server the H.D leds flashing as before but after post screen stops.

is that problem causal by deleting virtual drive
or is a raid controller failure? pls help thanx for your time!

p.s notice that server is brand new so im aloof to say that is a raid failure!
im running windows 2003 server r2 edition

2 replies

by oh smeg

And when the POST finished the HDD's are either inaccessible or turned off.

Try reading the User Manual this should have the correct way to setup this unit.

If you have a Hardware RAID you need to setup these before the System starts to Boot and this is generally between the time that the POST Screen Disappears and before the OS Screen appears but as I have no experience with this unit the manual would be the correct place to start.

Col

This discussion is closed to new replies.