Question Locked

slow communication between DMZ and trusted network

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Here's the basic scenario: I have a web server (let's call it "WEB") in a DMZ; I also have a backup server in the DMZ ("DMZBACK") that is backing up WEB. I want to move that backup job to a backup server inside the network ("BACKUP1").

DMZBACK is on Windows 2000; WEB and BACKUP1 are on Windows 2003 SP1.

DMZBACK and WEB both have NICs and ports forced to 100/Full, and the internal DMZ backup runs at about 200 Mb/minute.

BACKUP1, inside the trusted network, is forced 1000/Full (Gb), and the ports likewise. It averages 400-600 Mb/minute backing up resources inside the trusted network.

However, when I try to back up or do a file copy from WEB to BACKUP1, the throughput is about 25 Mb/minute. I had my WAN folks double-check the port settings on both sides, and validate that all ports are open in the firewall for BACKUP1's IP address.

I've been digging online for several days, and have not come up with anything else to check. Given that xcopy takes the same amount of time as the backup, I am pretty confident that the problem is in the network rather than the backup software (Symantec Backup Exec 11D, for the record).

Any ideas and suggestions will be greatly appreciated!

6 replies

by gabe.watson

Did you ever figure out this issue? Having a similar issue with one caveat. If I use the IP address of the webserver the page load rapidly from the inside network. If I ue the internal DNS to resolve the site, sloooooow. Everything looks perfect withan NSlookup and via pings and traceroutes...

by erik.dutton

Cisco thinks NAT is the core of the problem; they say that our current version of the IOS has a NAT bug. Right now I am on hold with them pending an (eventual) company-wide IOS upgrade. Once that is done I will be restesting, but until we update they won't spend any more time on it.

by dumphrey

are you only getting the 25 Mb/Min through the interface on back-up jobs from the trusted network, or any large file transfer?

What if you backed up to media on the dmz and then replicated/copied that media as a whole to the trusted network? Better throughput?

This discussion is closed to new replies.