General discussion

Locked

Spool32 errors

By webb ·
We are connected to a network printer hp8100N and we are getting several spool32 errors a day. Any suggestions

This conversation is currently closed to new comments.

8 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Spool32 errors

by maxwell edison In reply to Spool32 errors

Spool32 errors can be caused by a variety of reasons.

Go to the following Web site and review the possible causes. There will be a link to the appropriate resolution.

http://www.generation.net/~hleboeuf/spool32.htm

(REMOVE SPACES from the pasted URL.)

Good luck,

Maxwell

Collapse -

Spool32 errors

by maxwell edison In reply to Spool32 errors

.
.
You might also want to review this Microsoft article, "How to Troubleshoot Spool32 Errors".

http://support.microsoft.com/default.aspx?scid=KB;EN-US;q191949

(REMOVE SPACES from the pasted URL.)

Good luck,

Maxwell

Collapse -

Spool32 errors

by webb In reply to Spool32 errors

Poster rated this answer

Collapse -

Spool32 errors

by Pinoy_Teknik In reply to Spool32 errors

Here is the link to your question...
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q191949


Hope this can...

SYRUPHIN?

Collapse -

Spool32 errors

by webb In reply to Spool32 errors

Poster rated this answer

Collapse -

Spool32 errors

by LizzieBG In reply to Spool32 errors

This can take hours if you spend ages adjusting settings - but the only solutions that always works are:
Windows 95
Update the SPOOLSS.DLL file in the \Windows\System directory. For Windows 95 the original version should be 4.00.950, it should be replaced with 4.03.1212 or higher. This file is available from Microsoft support and is also included with later releases of Windows 95. You may have this file on another Windows 95 system. Check the file version of the SPOOLSS.DLL file by right clicking on it, select properties and then selecting the version tab.

Windows 98
Update the SPOOLSS.DLL file in the \Windows\System directory. Microsoft has not released an updated DLL for Windows 98. However Network Associates have tested the SPOOLSS.DLL file from Windows Millennium Edition (version 4.90.0.3000) on Windows 98 (and 98SE) and found that is file not only functions properly but also resolves nearly all Spool32 invalid page fault errors.
This fix is just brilliant and it's cured every machine I've ever seen with spool32 errors, daft as it sounds.

Collapse -

Spool32 errors

by webb In reply to Spool32 errors

Poster rated this answer

Collapse -

Spool32 errors

by webb In reply to Spool32 errors

This question was closed by the author

Back to Desktop Forum
8 total posts (Page 1 of 1)  

Related Discussions

Related Forums