General discussion

Locked

SPX Establish Connection Table is Full

By ihux123 ·
When I try to Rconsole to a Netware 4.11 server from a Windows NT 4.0 PC I get the following error message while i'm in Rconsole 'SPX Establish Connection Table is Full ' and I'm unable to connect to my NetWare Server .

This conversation is currently closed to new comments.

7 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

SPX Establish Connection Table is Full

by garym In reply to SPX Establish Connection ...

Check on your workstation to see whether you have a NET.CFG file. If so, remove the SPX= entry in this file.
Gary

Collapse -

SPX Establish Connection Table is Full

by ihux123 In reply to SPX Establish Connection ...

The question was auto-closed by TechRepublic

Collapse -

SPX Establish Connection Table is Full

by lcd4 In reply to SPX Establish Connection ...

Symptom
When attempting to create an SPX connection with a server across a WAN (whether using RCONSOLE, print services, etc.), the following error is returned: "SPXEstablishConnection failed to establish a connection to the desired server....the server connection was terminated by AllocateConnection".


--------------------------------------------------------------------------------
Cause
We got a trace from the segment that fails and verified that no response was received for the SPX connection request. Just one hop closer to the destination server, SPX connections were established with no problems. Suspect was a duplicate network address but all IPX communications were working fine.


--------------------------------------------------------------------------------
Solutions
A duplicate external net address was found so that the destination server was responding to the SPX connection request using from its RIP table the best route back to the originator's network address, which in this ca

Collapse -

SPX Establish Connection Table is Full

by ihux123 In reply to SPX Establish Connection ...

The question was auto-closed by TechRepublic

Collapse -

SPX Establish Connection Table is Full

by TheLordOfLight In reply to SPX Establish Connection ...

It's your routers. Our WAN group tried to tell us it was a workstation issue, but we are able to connect to other servers without any problem after getting this message.

Collapse -

SPX Establish Connection Table is Full

by ihux123 In reply to SPX Establish Connection ...

The question was auto-closed by TechRepublic

Collapse -

SPX Establish Connection Table is Full

by ihux123 In reply to SPX Establish Connection ...

This question was auto closed due to inactivity

Back to Networks Forum
7 total posts (Page 1 of 1)  

Related Discussions

Related Forums