General discussion


Start-up hangs at Building DMI pool

By velladraco1 ·
This started after installing USB ports in a socket 7 system. had some intermittent problems with the Isa channel 2 controller prior to this and was working on that before the client needed usb immediately for Digital camera. Have tried boot from floppy but system not finding . Should I sys the C drive again?
(system is rebuilt with only Windows 98 on it but client has misplaced his 98 CD so can't reload - don't want to wipe HD and start over for this reason.

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Comments

Collapse -

Start-up hangs at Building DMI pool

by Paul D. Masley In reply to Start-up hangs at Buildin ...

If this is a VIA chip socket system, most of your problems may be corrected by updating the drivers. I had the same problem with a s/7 amd system and this was the cure. The system needed bus driver update and hanging at updating the dmi pool. Thenew drivers can be found at VIA.

Related Discussions

Related Forums