Question Locked

Troubleshooting Hp Laserjet 4000 connected to catalyst switch

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Any ideas that someone can bounce off me would be great, incase i've overlooked something.

right now i have a Laserjet 4000 with a jetdirect card configured with a static ip. I have IP connectivity from end to end as i can ping the printer from every pc on the local lan and also from the switch i can ping the printer.

** Problem **
When i goto print from any system on the LAN the job get's queued on the print server but never reaches the printer itself .. i'm not sure if i have to enable anything on the switch side for the specific port that the printer is on. If anyone needs additional details let me know and i'll post.

Thanks in advance for the support!
Jay

4 replies

by thumbsup2

Need more information. What kind of print server? What operating systems are involved? How was the printer installed? Etc........

by sgs_gti_jay

Printe server is just simply an xp box .. i'm gonna run a few more things on my side from a laptop and make sure that the traffic is passing properly ..

i'll post my findings in a little while if i'm still stumped..

from the switch side - enabling cisco's port mon

from my laptop i'll use both wire and wireless connections so i can monitor traffic and use tcpdump .. give me a lil time to go through this. If you have any idea's off the top of your head that might be bogging up on the print server side let me know ..

only physical connection to the jetdirect card is ethernet which runs to the catalyst switch .. print server and printer are not physically in the same location ..

by thumbsup2

... the HP Network Printer Wizard (downloadable from HP) works wonders when installing any of their printers hooked to a network. There's something about their network communication protocols that needs to be set/added which does not get done through a normal Windows install network printer. Don't use the Wizard though for printers that are physically hooked to another computer and then shared.

This discussion is closed to new replies.