Discussion Locked

Vista-S6E SCSI Scanner & UDS-IS11 Card

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Umax Vista-S6E scanner with a UDS-IS11 ISA SCSI card, but I'm unable to connect the scanner to the computer, the card is known to be good however Windows 98 fails to recognise it, I have attempted to use different download drivers, but to no avail.
I have made nessecary checks to the hardware, but there seems to be no problems with it.

9 replies

by thechas

Which ISA slot on the motherboard are you using?

If it is a shared ISA slot (next to a PCI slot) that could be the problem.

Next, have you installed or updated the PCI buss drivers for the motherboard?

You need to have both the PCI buss andPCI to ISA drivers working properly to install an ISA card under W98.

Finally, what about SCSI terminators?
Is the card and scanner lines properly terminated?

If you don't get much further, and you have only 1 ISA slot, I recommend that you install a PCI SCSI card.

Chas

by therealmofthedarkangel

it is a shared ISA/PCI slot but all the drivers are installed, I've set the SCSI terminator on the scanner, the card will only support the scanner and nothing else, the riser has two ISA and three PCI slots, and all other cards I've tried are registered and installed without a problem

by ismail_ngr

Hi , Already i had problem with the UDS-IS11 Card. I think the card need a patch for running smoothly more than 300 MHz Systems. After installing the SCSI (not in real scsi, its a personal scsi card for the scanner) in my UMAX ASTRA 610s Scanner. After my system not starting. I got Blue Screen Error.If u need the patch email to me the email address ismail_ngr@yahoo.com .

by therealmofthedarkangel

I have added all my Tech Republic Points to this question, I need the problem sorted-out as soon as possible, the card and scanner now register on boot-up, but the add new hardware wizrd constantly runs when scanner is powered-up

This discussion is closed to new replies.