Question Locked

Vlan subnetting trouble for about 60 different vlans. HELP!!!

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi everyone, I'm having some trouble with trunking networks. I'm new to this, so any help will be great.

The question is about the subnetting for these 60 switched vlans. I have the trunks working and the vlans, but at assigning subnets everything falls apart.

What is the best subnet for these 60 new vlans? what about /30 for the 4 routers and /28 or /27 for the vlans? every vlan may require around 10 new ips.

Any help will be appreciated.

5 replies

by netman1958

that you are wanting to further subnet? To get 10 ips per subnet will require a /28. However, if you are starting with a class C subnet, that would only yield 16 subnets. If you are starting with a class B, that would yield 4096 subnets.

If you can provide some specifics I can give you a better answer.

by ricardocezar

Hey thanks for the reply, Yes, I kind of figured that out, the things is that it's freaking me out because it starts to look like a kinder surprise, as the problem starts when I switch from physical to logical.

Specs>
4 routers interconnected using eigrp
60 vlans spread between the 4 routers
10 new ips for every vlan.

I would use class c /26 for routers
and /30 for vlans. The thing is why would I assign /26, what about all those unused ips between routers? That looks like a bit of waste, you know what I mean?

Cheers

by cg it

Normally, designing a Virtual LAN network follows the business organizational structure. Departments are assigned to Virtual LANs for administrative as well as security purposes.

While I've seen some really big companies further segregate computers within departments by Vlan, I've not seen 60 VLans used. Even on a campus level.

So while you can subnet out an address space to encompass 60 VLANs, with 10 hosts per subnet, I'd revisit the design and need for 60 VLANs

This discussion is closed to new replies.