Discussion Locked

vLANs on Cisco 3845 with etherswitch

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to config vLANs on a 3845 Cisco router. I have a 48 port switch service module in port B. I can set the vLANs up on the switch but can not figure out how to truck the vlans to the router using the internal gigabit link. The ports on vlan1 are visible on the router. I have tried setting subinterfaces on the router for the switch with an ip address. I have tried with VTP and can get the router to load the vlan data from the switch and still no connectivity. I am currently in vtp transparent. The documentation all seems to be for seperate routeres and switches.

1 reply

by joe_kim_mikey

I was having the same problem on a smaller scale but still the same!!! Make sure that your router is pluged in to switch #1 and from #1??? If this dont work call the help and support and thay will walk you through almost any problem... DONT E_MAIL them it takes a lot longer. they will tell you how too PING each computer and how to fix it... The susport is all free and they will give you a name and account # to use any time... If this helps out please let me know or if you need any more INFO... JOE

This discussion is closed to new replies.