Discussion Locked

Ways to pinpoint and address terminal services network lag

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm looking to find some ways to get to the bottom of network lag that's being experienced from users logging in through a thinclient into a terminal services session. The server is running Win 2003.

The 40 or so users don't do a whole lot on the computers. They only have access to MS Office products and IE. They're mainly experiencing the lag when typing in Outlook or Word.

While connected, if I ping the thinclient machine, the time is typically at 1ms, not under (which I believe it should be).

What strategies/tools can I use to figure out what's causing the issue?

6 replies

by wizard-09

Ok so you have 40 users connecting to a server, what sort of network card is this server running, also how fast is the read/write on the hard drive when there is a lag check the server processes and see what process is taken up the most useage.

The server may not be able to handle that many users, i remember when i support citrix we had this problem updated the network line to 1gd installed a new 1T bit hard drive moved all the user profiles over to it and bang was much faster hope this helps you out.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.

by mikeliketrike

The network card on the server is a Broadcom BCM5708C and the hard drive has a 8MB buffer 8.9 seek time at 7200 rpm.

What's peaked in memory usage is svchost, but user instances of firefox and ie typically top the list in mem and vm size.

Hope that helps.

by robo_dev

Look for misconfiguration in server, any routers or switches in-between. Duplicate IP addresses, faulty cables, faulty NICs, etc.

If you hook a workstation directly to the server NIC with a crossover cable, how is the performance then?

What is the network topology? Is the server running a gig interface to the switch and the PCs all running 100mbs? What type of switch?

Assuming that there are no topology errors (e.g. network loops) or some hardware that's faulty, then I would dig into it with a protocol analyzer (e.g. WireShark).

by mikeliketrike

You're correct with the topology setup in that PCs are running 100mbs and the server's got 1GB through a Cisco switch.

The performance is fine if you log into the terminal server through RDP rather than a thin client.

The only "not typical" stuff is that the thinclient broadcasts DHCP as well as the the DHCP server and there are 2 domains being replicated between 2 servers. So everyone's DNS is something like 'computer.domain1.domain2'.

I'll check out WireShark and see what I come up with.

by on1eluv

how do i stay safe on my ps2 online....I know for a fact that there are kids tearin up ps2 online by booting people,tracking thier ip,even bustin mac adress's..i have a Netgear Wireless N router WNR2000; it conects to my modem,as well as my laptop:COMPAQ PRESARIOR3000. I just wanna know how to hide my "IP" when I need it. i.e..there are multiple occasions that I know when im being PINGED, other times its just a straight boot off CODE..SOOOO the Q is how do I use my programs sutch as peer guardian 2, or HIDE`MY`IP.com/.exe....I know its possible I just cant piece it together.
Is it a portfowarding issue,,LACK of defense period,set^ a diff domain etc..
I jUST WANNA PLAY THE GAME!!!!!! rrrr

by ag4it

Hi Mike,

I don't have the solution for finding the cause of the issue, other than the fact that it could just be in the nature of the RDP protocol used by thin clients.

Issues with slow RDP performance can be addressed with a software product called Ericom Blaze. Blaze accelerates and compresses standard Microsoft RDP, increasing performance by as much as 10-25 times. Blaze helps deliver higher frame rates and reduce screen freezes and choppiness.

You can read more about Blaze at:
http://www.ericom.com/ericom_blaze.asp?URL_ID=708

Adam
Ericom Software

This discussion is closed to new replies.