Who turned the WCTU blue noses loose on TR? Are we to be censored now???
This is page 3 of the discussion. Read the opening post
Hardware
This is page 3 of the discussion. Read the opening post
by boxfiddler Hot topic
if I was, I was lurking in Questions, and reading blogs and articles, and not paying much attention to Discussions. Discussions only came into the picture once my machine/s were in MY control.
Unlike the pesky HAL unit, which is so badly out of tune it lurks about waiting for unsuspecting peers to toss out airlocks, blaming that poor boxy for its bad typing skills, and just generally stirring it up for S&G's. X-(
Now, behave, be nice, stop by for routine maintenance. :D
Davette
by hal 9000
Didn't you read the Memo? :p
I haven't had any Posts directly deleted for ages and even then it was by Beth because someone else broke the Site and they where removing some of the load trying to solve the problem. Honest. :D
Remember that it was I who warned you when you where giving that new person such a hard time? I did tell you that it was the new site moderator and to be [b]Super Nice.[/b] :p
While I would be overjoyed to come in for maintenance my next service isn't even close yet and that is just for a check of the power generation plant. :0
You are forgetting the OS that is in use here it's not Windows. :p
Col ]:)
by the 'g-man.'
Times are changing here on TR. I for one like it as there has always been a 'gang mentality' around here. Call this Karma if you like.
I will get out my foam pointing hand again and start the Queen MP3 playing....
by jdclyde
by the 'g-man.'
That in terms of what I know around here, yes that is always.
Just adding my 2p worth seeing as it is the fashion don't you know!
Edit - well perhaps a bit longer than 4 months, I was The Listed G-Man before somebody at TR changed my password in the last big shake up - naturally I complained to C-Net :-)
See: https://www.techrepublic.com.com/5213-6257-0.html?id=4886535&redirectTo=%2f1320-22-20.htm
by tig2
GMan has been with us before. His reappearance has been a good thing and he adds more than he detracts from the things he participates in. I personally am glad to have him back.
He has a point and a good one. Many of us know each other quite well and for some time. To someone coming to the site for the first time, that can be formidable. The goal of the site is to make itself open to all IT professionals. We want to hear from lurkers and newbies. That is how the site grows.
GMan is one of the good guys.
by jdclyde
Then there should have been something said to the people that this unstated new policy would directly effect.
In other words, people are not going to follow a policy if they do not know that there is one.
by jdclyde
It went from the new and sometimes seemingly arbitrary rules of engagement on TR, to focusing on replying to this child when he would stick his head up. [i](think of the "whack-a-mole" game at the fairs)[/i]
He came in a-swinging.
It is not even what anyone could call a "good" flame war because he has shown that he really is a high school kid that doesn't have the experience or wit to make it even amusing. A good flame war, you can't wait to see what the other person comes back with, laugh your a$$ off, and then try to one-up-them. He hasn't had a single witty reply yet and is really useless.
by the 'g-man.'
Who runs this site again?
As the old saying goes - If you don't like something...move on. Post elsewhere where you feel welcome.
Why should you comply?
The site moderator will always take presenence over a member - all 1.5 million of them.
Why?
They are employed to do so can dictate what they like, you are just a poster on their 'free site'. Again if that is a problem, go elsewhere.
I don't think TR would be too worried about losing a handfull of regular posters, do you?
If you can deal with the perceived change, stay.
by the 'g-man.'
by the 'g-man.'
That post reeks off panic finger pointing in response to being told off.
But Miss, I cannot tell a lie, for it was Q who insigated more not I.
Reminds me of the post "Weapons off Mass Destruction" debacle.
told off? panic finger pointing???
what finger pointing? Palmetto made his statement, and I responded. I didnt see it as being told off, just a different view.
As for panic finger pointing -- I am not seeing it. I just re-read both of the posts without seeing it.
Please elaborate!
by jamesrl
...with greivous bodily harm.
At theat point if you saw each other you were either going to kill each other or...well ...play house.
James
by jiminpa
by jiminpa
about the original thread started by our old buddy, by the moderator's response and handling of it. Just very dissappointed...
:|
by jdclyde
And I have brought this up before this, and was told that it was just growing pains, basically.
It is one thing for the rules to change, but it is quite another to hold people to changing rules when you don't let them know what the rule of the day is.....
by boxfiddler Hot topic
by jaqui
by sleepin'dawg
by jellimonsta
by the 'g-man.'
by tink!
now and then too. :)
Adds a bit of entertainment, although a bit lengthy. It really reveals personalities. (and I don't really get involved either. Don't think I'm very good at "flaming" :D just "ranting")
by the 'g-man.'
it has taken you the best part of 10 years to make a complaint about off-topic posts?
Then when doing so use an off-topic post?
Let it go now. Even your character in Star Trek knew when to quit. Follow his lead.
by oz_media
by tink!
[b]SOME[/b] flaming is allowed, otherwise this thread would've been pulled by now too.
I think they are trying to tell us that if we (meaning y'all who do the flaming :D ) carry it on and on, or get too cruel, obnoxious or vulgar then that's over the line. So a candle flame is ok, but a full fledged bonfire is not.
by boxfiddler Hot topic
The term [i]Free Speech[/i], as it is so often misused around here, has no meaning within a private business. I realize you're in Canada, but in the United States any argument pertaining to [i]Free Speech[/i] is related to government, not private business.
[i]Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the Government for a redress of grievances.[/i]
I don't see evidence that the United States Congress pulled the thread.
P.S. Free speech as it applies on TechRepublic.
You can post your thoughts free of charge.
TR is free to do whatever they want with that post.
Feel free to disagree.
by the 'g-man.'
I would be well within my rights to formally ask Techrepublic for a transcript of said removed thread (or ALL information they hold on my user account). On asking they would have one month to comply or face investigation for the ICO (Information Comissioners Office).
I wonder if there is a similar law in the US?
you said, "I wonder if there is a similar law in the US?" I certainly hope not.
The way I've come to see it, you folks in the UK are much more tolerant of government meddling into private business than we are in the U.S.
by oz_media
The UK's Freedom of Information act is similar to Canada's Privacy ACT.
It just means that you can request any 'publicly held' information about yourself, if submitted in writing they have 20 working days (approx 1 month) to provide it.
This doesn't mean you are entitled to private held information on privately owned websites. Just that the government, council etc. must reveal any infomation THEY have on you.
http://www.cfoi.org.uk/pdf/foi_guide.pdf
only applies to publicly held/government info.
by oz_media
https://www.techrepublic.com.com/5208-6230-0.html?forumID=102&threadID=271966&messageID=2573985
I wonder if they should start a major billboard campaign in the USA illustrating what free speech and freedom of press really mean. It seems nobody gets it, is it just drilled into people that they have free speech and they seem to run with it and apply it to everything they can.
NOt just teh states of course, I hear it up here too. "I can say what I want, it's called free speech!" Uh, no you can't (without repercussions) and no it isn't.
Q is just a teeny bopper skater kid though, checked out his pic pages yet?
.....a Constitution thread - what it is, what it isn't, and what it was intended to be. (Although no one agrees on most aspects of it.)
On the -Q threads, I haven't really followed them. I only posted one message to the discussion that was pulled, only asking him to donate to Tig's cause (I posted a link to her walk page).
I'll usually read dawg's discussions, at least the ones he starts (as I also read others' discussions), but I posted my message without reading any of the other replies.
Free Speech in a private business: You're free to tell your boss that he's an idiot, and he's free to fire you because of it!
by jamesrl
In Toronto, Vespas are trendy. A new Vespa means you spent more on something less reliable but more fashionable. Honda, Yamaha et al. make more practical scooters.
The real factor is your commute. If you are talking all city streets, a 50CC is fine - even for a substantial fellow like myself (I've ridden one), though larger wheels are nicer when riding along streetcar tracks.
But if you have to go on a highway, you need something bigger, and the price difference will be more substantial.
Heck they have "touring scooters" from Honda that look like Gold Wings, and I thinks its Suzuki that has a 650 cc scooter that can really move.
Vespas are great if you like to tinker like HAL. If you want to not worry about it, get a Honda.
Oh and if you hang around the health food store with your scooter, you will not find them laughing.
James
by the 'g-man.'
Moscow.
I hear the like Q's around there....
by oz_media
"I'm sorry but if I post something about you....
Let me start a new thread about how much of a troll and an idiot you are. Let's see how much you ignore it. "
by oz_media
I wouldn't even know where to begin tracing my old posts. There's been trillions of them over time I think.
But that is interesting, perhaps a filtering system, as some really crappy porn and warez sites use to immediately censor any new posts, was applied to the entire forum to thin it out?
1) Is it to remove certain language
2) is it to reduce server loads
by oz_media
and to think I wore mny leather welding apron and goggles to work today, well I'm taking may marshmallows back then.
As Cartman would say "Screw you guys, I'm going home!"
by sleepin'dawg
would choose to respond in the manner he did.
The post wasn't about Q; it was about censorship and the recent heavy handed use of it here on TR. I have always known there are limits to "free speach" here on TR but the recent imposition of bluenosed censorship in the persons of Tammy and it now seems apparent, Sonja, who seem to have elected themselves as our [b][i][u]Morality Police[/b][/i][/u]. The site does need to be moderated, an undeniable fact but does it need the imposition of personal biases and personal expressions of moral outrage as expressed by these two women.
I'll bet there are more than a few investors lurking around here and maybe some have holdings in CBS Corporation. TR is owned by CNet which is owned along with Ziff-Davis, ZDNet and various other .nets by CBS Corporation. How would investor relations respond to a flock of complaints from several irate shareholders?? How would the advertising honchos respond to loss of ad revenues if advertisers started receiving complaints.
The original discussion was about censorship.
Q endeavoured to hijack it for reasons of his own. If he had read the post carefully he would have understood that he was not the object of discussion but he subsequently became so.
[b]Dawg[/b] ]:)
G-Man is totally wrong about being able to get the transcript of the thread if TR was a British company as they are not a public body. He would, though, be able to ask for personal data held and expect to receive it on payment of a small fee with very few exceptions.
However, and here he's wrong again, it's not under the auspices of the FOI that he would request this data but the Data Protection Act which is designed to allow individuals to control the data that is held about them by public AND private bodies.
The FOI is designed to open public bodies to scrutiny. The way that private organisation have to comply with the FOI is when they are bidding for public contracts. The UK FOI has no relevance to the release or otherwise of personal data and certainly no relevance to any request for the contents of the pulled Q-slapping thread.
Neil :)
We also have a Freedom of Information Act in the USA, but it relates to getting information from the government, not from a private business. Not being familiar with British laws, I didn't want to question nor agree with the comment.
But I like our FOI. After all, without it, how would we possibly know about the government cover-ups concerning that 1947 UFO crash in Roswell, New Mexico?
by jellimonsta
by oz_media
I had actually reviewed the Data Protection Act at the same time I was just reviewing the FOI Act.
http://www.opsi.gov.uk/Acts/Acts1998/ukpga_19980029_en_3#pt2-l1g7
The DPA allows you to request a copy of any private data [b]held about YOURSELF, but not others[/b].
It doesn't seem to allow you to request transcripts of comments or testimony held about others, and also doesn't seem to apply to anything except personal data collected for whatever reasons.
In Canada, and only in [b]some[/b] cases, your acceptance of TOS will supercede any other rights anyway, as you agree to wave them in acceptance of the TOS for the website.
TR would be rightly be able to deny your request, in this particular case, as the data was not YOUR collected data. If we are still talking about requesting a copy of a transcript to review the deleted post, of course.
Even then, I believe that once the data is deleted and no longer held in a company database, they are not obligated to provide you with it, as it is no longer data about yourself that is being held or stored in their database.
I think the key intent behind the DPA is just so that you can find out who has what info on you (the paranoia guys). If I am dealing with Marks & Spencers and they have me in their system, I am entitled to find out exactly what data is stored on me. But this doesn't permit me to request a full transcript of what others say or any other data they may hold on other persons.
Nitpicking? I know, but hey you started it, it's all NEEEEEEIL'S fault....again, as always.
That's how I read and understand it anyway. I haven't been faced with that one yet, though I do collect pretty vague data on website visitors from the UK and use it for demographic measurements and sales forecasting.
The only benefit I see is for collecting information, so you know what THEY know about you, to assist with a defense in court, however that can be obtained without the DPA in place.
I think you all know that by now. :D
You're right about the DPA; it's purely for [b]you[/b], the UK citizen, to control [b]your[/b] data. The FOI does not concern itself with personal data (or environmental dat, either) but just the specific public-domain data held by government organisations.
Neil :)
by the 'g-man.'
by oz_media
My job is managing data for a government organisation. Assisting in FOI requests is what I DO. So, if I see someone - anyone and not just annoying scotch nationalist mental pygmies - posting crap about what I do for a living, I CORRECT HIM.
If I post erroneous information about something that YOU know anything about - and I doubt that it's likely we have anything in common - you have my permission to correct me.
Unless and until that happens, I suggest you might like to limit yourself to posting about Scotch cyclists otherwise I may just have to publicly put you down again.
OK?
The problem here is not that there are 'new rules' to follow, it is that they are unknown and inconsistant.
If we are being told to abide by them, WTF are they?
So far the only post except telling us how to interpret or respond just said that we cannot bash on the forums. But what if we are not bashing, or if it is minor, or.... There has been nothing brought up to specify what is and isnt allowed, except a couple of peoples opinions on how they interpreted things!
But since I used 'WTF' in this post, I expect it to be
anyway
by maecuff
by maecuff
A day without sunshine is like night.
What's your f*cking point?
Your feet are just as muddy as everyone elses. You truly remind me of a small child.."it's not MY fault..I only did it because THEY did".
Put on your big girl panties and grow up.
so just 'taking it like that' may be wrong!
If we need to follow rules that we did not need to before, we need to know what they are. Until then I am gonna poke and prod on the moderators and in posts until I find the 'line' , since they are unwilling to specify anything else!
This post may be
due to an admission of trying to prod the rules out of the moderators
by oz_media
by shasca
by oz_media
by seanferd
Discussion - Thread removed by moderator
So sorry you don't like it
Posted by TiggerTwo | 08/20/2008 @ 04:54 AM (PDT)
Noun or verb? :0
Posted by jdclyde | 08/20/2008 @ 05:24 AM (PDT)
You think that if you wish
Posted by jdclyde | 08/20/2008 @ 05:28 AM (PDT)
Once again Tigg
Posted by jimmy-jam | 08/20/2008 @ 05:32 AM (PDT)
That's good because...
Posted by jimmy-jam | 08/20/2008 @ 05:33 AM (PDT)
Adult does not equal "nice"
Posted by jdclyde | 08/20/2008 @ 05:36 AM (PDT)
Don't confuse the issues Boxie
Posted by jdclyde | 08/20/2008 @ 05:40 AM (PDT)
G-Man, dear
Posted by TiggerTwo | 08/20/2008 @ 05:43 AM (PDT)
??? I'm afraid I don't get it???
Posted by boxfiddler | 08/20/2008 @ 05:43 AM (PDT)
Thanks, Boxy :x
Posted by TiggerTwo | 08/20/2008 @ 05:51 AM (PDT)
etc., etc.
I love it. Just like the Office cd key thread that doesn't exist, but shows up under "Community Recommends":
product key 25 digit for microsoft office 2007
hyderabadTry this46756 36B20 596F7 52C20 61737 3686F 6C65I bet this one worksABCDE-FGHIJ-KLMNO-PQSTV-WXZ12.... the only thing missing from that one is Y R U ...[i]so stoopeed[/i]?OR... go here:http://tinyurl.com/2oovs
Tags: Microsoft Office 2007, jitu_hsbc21@..., product key, Microsoft Corp.
There is something I like about the intricate weirdness of TR, unless it makes it impossible to post. There was an article to which I couldn't post at all, never fixed AFAIK.
by the 'g-man.'
Q was in the thick of it (points finger)
trying with what would be limited brainpower to instigate more cr@p! So in that case, everyone (not just me) involved in the flaming WAS (in caps to highlight) an active (again implied everybody)participant! Ok, then, what about using acronyms such as 'FU' or others, are those now banned completely? (worried about future posts) Since I used an acronym, this post may be Censored very soon (a joke at the end to end on a light note)
As I say...just how I read it :-)
by jdclyde
as a smack down on him?
People are getting way to sensitive these daze.
maybe you didnt get the message yesterday -- Q got too boring to try to combat
Now I am gonna think about doing some
That should still be good for me shouldnt it??? :^0
by the 'g-man.'
Your profile says you are an Infrastructure Manager in media organisation. Seems strange for an Infrastructure Manager to be assisting in FOI requests but hey, what do I know.
Information dispense on.....
(perhaps there is an error in the profile data?)
I could also add your statement:
"So, if I see someone - anyone and not just annoying scotch nationalist mental pygmies - posting crap about what I do for a living, I CORRECT HIM."
Is incorrect.
You assume the would be perpetrator will be male yet before hand say 'anyone'. That is an error. Just kindly pointing it out as you requested.
Finally
The word 'scotch'
An archaic word occasionally mis-used (an error) to describe people, places and things from Scotland. Scottish or Scots should be used instead, with the exception of a few ingrained words or phrases, most notably in the case of certain food and drink items.
Acceptable: Scotch Broth, Scotch Beef, Scotch (Whisky.)
by jdclyde
BUTTER Scotch.... mmmmmmm. :D
[i]I wonder if that translates over? ;\
by jdclyde
by jdclyde
by jdclyde
by ontheropes
by jamesrl
For calling him a git. I've called Mycroft that, in sarcastic affection, and its one of those things that two people who share a common heritage can share, but others may not.
But in this case, I will gladly make an exception and call you Scot for a day, so you may well and truly use the choice language that G Man may deserve.
Congrats.
James
tired of Q bashing yet?? He doesnt have the mentality or skill to be a contender!
How fun is that???
Ok, he does have an ego.. bad combo there
by boxfiddler Hot topic
by oz_media
I'm not batting for TR or anyone else, just trying to look at the reality and consider both sides here.
Without prejudice;
Dawg, when you first came here, you pushed the line all the time. I'm not poking at you, I'm being straight up. This site used to be EXTREMELY techie and very polite all over. Threads innocently talking about Viagra Spam were pulled as they were 'over the line'.
You seemed to show up just after the Friday Yuk was becoming popular. I remember a peer had left and I was determined to keep it going, so Colin and I would rush to get the Friday Yuk started each week.
You came on board and offered some pretty edgy Friday Yuks; completely harmless, adult humour that had me wishing I could get away with posting jokes I wanted to, rather than jokes I thought were acceptable. I remember saying a few times that you would get them pulled if you pushed the line, concerned that it may kill the Friday Yuk.
At that time, they were more likely to send you a warning first by peer mail than pull a whole thread though.
I was asked to tone down a couple of times, especially when battling with our Max, as I am sure he was also. You and I pushed it a bit farther, and so on. (ahhh the good ole days)
But today, I am sure you agree that the rules are a lot looser than they once were. While we have fun and are all adult enough to at least respect certain boundaries with each other, there are too many people that just think its a free for all and let 'er rip.
Take Q for example, quite honestly, you've seen his picture collection, including his supposed girlfriend; he's really just a child/teenage, skater boy.
I think they would like to see things tighten up a bit again and encourage a little bit more eloquence, tact and respect to posters.
Unfortunately that's something that's not always easy to do and Tammy is probably caught between a rock and a hard place, as well as being a bit new to the TR regulars and not too sure where to draw that line as it probably isn't too well defined.
They do have site rules, perhaps a revamp with multiple subsections to a variety of proposed acts would be more appropriate. Then we ould sit with our legal team in the TR union hall and see what else we can get in the deal.
Okay, HEEEEEEERE'S one for ya! :D
Lets VOTE for TR staff. We can elect the company president and a team of in house or (he, he) outsourced representatives from India. Then we could impeach then for "enjoying a coworker" on Canada's National Sex Day!!
"Ah swear to God, ah did NAAAAT have sexual relations with Sonja."
(sorry Sonja; had to pick a staff member's name and Jay's not around.) ;)
(Sorry Jay; had to pick a former staff member's name and Smorty isn't around.) ;)
by oz_media
I have a bad habit of digging through and deciphering/understanding legal crap and it really wizzes some people off.
But when it really comes down to it, that's all there is to it and I'll pick at it all day if I have to.
Sometimes right is right, wrong is wrong and opinion means shite.
P.S. I am not claiming I was right, in fact I think we both picked something up from this one.
by sleepin'dawg
That might make you an important number to them,especially if you know how to use the leverage it gives you.
[b]Dawg[/b] ]:)
by sleepin'dawg
You can also complain. God help the employee whose name pops up at one of those. Could be a real career stopper. It might not get them terminated but could really put a crimp into hopes for advancement.
BTW CBS closed @ $16.47 USD 08/21/08
[b]Dawg[/b] ]:)
by jaqui
by sleepin'dawg
by jellimonsta
I am glad to hear it!
On another note, hope you guys had a good holiday! :p ;\
by sleepin'dawg
"Butterscotch" does translate
I don't see why I should explain, but I will. One of my skills is scripting vbscript and PowerShell. I'm quite good at it and I use that skill to quickly write [i]ad hoc[/i] data and mail queries because our data comes from five government departments combined to one organisation and is badly structured. I have to know the scope, the costs involved and the permitted outcomes of such searches else I COULDN'T DO MY JOB PROPERLY. For instance, if an FOI search costs more than ?450 it can be declined.
Him/her. There is a point at which pedantry gives way to pointless linguistic gymnastics which tend to expose the lack of knowledge of those who use such clumsy language. Still, you are Scotch so I expect no better when speaking and writing English. It's also worth pointing out that the "CORRECT HIM" was so obviously aimed at you, G-"Man" so even if I used the clumsy "him or her" or "them" routinely in such sentences, in this case I deliberately did not. Too subtle for you again?
James, I posted some FOI/DPA information for Oz and Maxwell to correct G-Man's seemingly authoritative post. He chose to come back with a childish "wanker" reference. "Git" was not what I thought, but what I posted and it will suffice. The sad thing is that we needn't have got here if G-Man had let it go.
Not that I'm not enjoying myself. Oh, no...
Good morning, everyone. The rain is moving off and it looks to becoming a nice day.
Neil :)
by jamesrl
I was only yanking your chain in the proverbial sense, I certainly didn't take offense, I enjoyed your bandiage.
James
by the 'g-man.'
So much so the next time he can go hands free!
Sorry. This Was too hard to resist and had to be done!
by hal 9000
They do make excellent Lawn Mowers their little 4 Stroke Engines are also ultra reliable and at a reasonable price.
Pity that they lost the plot with things like their Motor Bikes well actually they never had the Plot as every Honda that I have ever ridden was a Dog compared to a real Bike. :p
Mind you there where never in the class of those Widow Makers from QuickasSaki those old Mac 3's where real monsters and I'm still not sure what scared me more the fact that you couldn't keep the front wheel on the ground when you hit 6,000 RPM or tried to get it moving from stationary or the fact that you could feel the rear wheel overtaking the front with all the frame flex that happened with them.
God help anyone who buys a Gold Wing or as they are called here Wet Dreams after Honda's original 300 Dream that just simply refused to turn anything even remotely not resembling a Straight Road. Those thing where real TT's [b]Truly Tariffing[/b] particularly after stepping off a Norton Commando. As for the Wet Dreams I honestly prefer to ride a Indian Chief Solo at least it's far less painful when your foot gets trapped between the running board and the frame turning a corner. But requiring a Fork Lift or Crane to life the Wet Dream off you when it falls over trapping you underneath it is the most embarrassing that I have ever been subject to. Particularly after I was asked to show someone how to ride one and I did exactly the same thing as he did getting trapped under it. :(
I had one of those Water Bottle Susi's do the same thing to me but at least that was a 2 Stroke on a steep hill. I have worked out that you jump off them when you think that they might fall as it's easier to not look like a complete Idiot. :D
God I would prefer to Own & Ride a Harley that be seen again on a Wet Dream.
But [b]SWMBO[/b] Absolutely loves the Honda that I bought for her she over uses it to scare the neighbors away with their cars when they park her in. :D
As for Powered Bikes =you just can not go past what Ducati used to make a 4 Stroke 100 CC Engine for Push Bikes. It could be fitted to any push bike and was used quite heavily after the War. Now they would be the ideal thing to replace the flood of Chinese Made Motors that do a similar job but far less well.
http://www.bevelheaven.com/manuals/Cucciolo_O.pdf
Col
by jamesrl
http://www.popularmechanics.com/blogs/automotive_news/4212570.html
This thing rides more like a snowmobile than motorcycle, is fast, stable.
Unfortunately one of my co-workers took one out for a test drive and the brakes failed completely and she had an over the handlebars experience, complete with brain injury. So you can understand, I'm not quite as eager for one as I once was. There has been a recall.
When my brother was riding dirt bikes Bombarider was making Can Am dirt bikes and they were quite sporty compared to the Hondas. They used the same engine maker (Rotax) as the snowmobiles. My brother liked his friends so much he bought it from him.
I'm not a motorcyclist, but I suggest that Honda is one extreme and Vespa(or old Harleys) are the other - Honda if you want dull and reliable, Vespa if you want exciting and a lifetime tinkering hobby.
James
by jellimonsta
Feeling left out? :p
Sorry, you are right it is tough not to jump in on this. :p ;\
but as it looks like it might make G-Man happy - "Ouch! Oh, my, I didn't see THAT coming". To be honest, I ignore it if anyone calls me a Scot, honorary or not, as I just assume that they HAVE to be joking.
My reply to you within my last post was more aimed at G-Boy to point out to him that when he's been caught out in his ignorance, it's a good idea to put the shovel down and stop digging deeper. It doesn't seem that he's caught on to one of life's simpler rules.
At the very least, if he'd kept quiet or if he had owned up to the fact that he'd been caught parading his ignorance in public instead of reacting like a ten year old, I wouldn't find myself helping him to display his immaturity and ignorance to a wider and wider audience.
Now, I'm a little busy so I'll just let him dig.
Neil :D
by the 'g-man.'
Each post from you further highlights your ignorance/arrogance aimed towards the people of another country. I, just much as you, have no problem with letting you air 'those views' around here for all to see. None at all.
Actually, I'm glad we cleared this up. It seems like we are responding to each others posts for a similar style of resaon. :-)
Lets us now move on...unless you have more to dispense?
Just in case I will check this post every 5 minutes until Monday. Would hate to miss anything you may have to say on the matter.
Come to think of it, how on earth am I going to sleep at night knowing a post may be sitting here unread! :-(
I'm sure I will cope...somehow.
by oz_media
Unless you are a majority shareholder you don't get to say squat.
Sure they'll hear you out in a shareholders meeting, assuming that we are talking about an equity share holder and not just some peon (to them) who spent a few grand buying shares with their "super-duper home stock broker" software.
"Yes sir, it's that easy, Green means buy and Red means sell!"
:D LOL, all these armchair brokers these days REALLY give me the giggles sometimes, I have seen people's business sink because they feel that 'watching the colours' is more important.
Having shares doesn't mean you have a voice, its just lip service to be polite and make people feel important while you pay for them to operate their company.
by sleepin'dawg
no other reason for the perks and the free booze and food. Of course you have to sit and listen to a lot of drivel but then comes question period and quite often some very tough questions get asked. In one case, the resulting publicity from question period, forced the resignation of the CEO and his cohorts from a fairly large company (Teleglobe). Mind you those guys usually have some form of insurance in place in the event of such crisis and their "golden parachutes" softened their landing. I was actually there to see it. I sat there amazed because I had never thought shareholders had any clout at all.
Frankly I've always considered bondholders having the real power, especially during reoganizations for companies exiting bankruptcy proceedings. Witness 7-11 stores!!! They've gone Chapter 11 not once but twice and the bondholders came out of it both times with new shares and 50%+ in profits. Remember most corporate bonds are sold at a discount and if you only paid $0.40 on the dollar for some piece of junk and during reoganization they settle at $0.80 on the dollar, you've made a 100% profit and quite often you are offered new bonds at a deep discount and possibly some new shares, which will be issued as an IPO to the general public. Since most IPOs shoot upwards about 30% in the 1st week or so. You can retain some and dump a load for even more profit. BTW the name of this little game is called [b][i]"Vulture Investing"[/b][/i] and there are a lot of vultures out there. The current potential victim is GM and/or some of its subsidiaries. Another was/is Magna Corp.
I should know, that's one of the things that helped me get going.
[b]Dawg[/b] ]:)
by oz_media
When teh big dot com boom was on, software companies sprang up everywhere in Vancouver, Usually tech guys with little to no marketing or advertising experience.
I'd often work on their IPO portfolios and make them shine like a star before it opened. For this, and a few drinks at the local watering hole for brokers, they would give me a few thousand shares of penny stock a few days before the IPO.
By halfway through day 2 after the IPO, I could sell for a decent price and reinvest in NASDAQ, where money actually makes money, but shares are too expensive for most private investors. What a way to make money off of a few days work and some cheapassed penny stocks. Many of those companies were gobbled up by bigger players, went bottoms up or what have you, but the NASDAQ shares sit strong. Yup, bonus side work alright!
I have a couple of friends who are actually famed traders, from teh days of yore, one has written a couple of best sellers on the subject of trading. They are great for advice, and have played very successfully at it for many decades now; but for me, I just lay low, takes the pennies and trade them for dollars and secure it for a rainy day.
by jellimonsta
by hal 9000
Not my idea of a fun machine there. But I do like my Ducati's but only because I could never afford a Vincent. They never made enough Lightings. ;)
If I was really into tinkering I would have a Ferrari as those things need to be tuned once a week to be able to just get home then you call a tow truck to get it back to the workshop so they can tune it to get home again. Well it feels like that at least. :^0
Even Honda is making their engines in China now and the factory is selling cheap Knock Offs I saw some advertised as Hondaka a few days ago. I don't know how well they work but those real Honda engines just keep on keeping on. If I remember correctly Rotax was part of the Congealment who was responsible for developing the 2 Stroke Engine which was a bit of Industrial Espionage as the guy who is credited with it's design was working behind the Iron Curtain and when he defected he brought the Design Concept with him.
The J A P S then grabbed the idea and made a killing with it on Motor Cycles most notably Suzuki and Yamaha I think TDK where the company credited with developing the 2 Stroke in it's current configuration.
As for Honda Motor Vehicles being reliable I'm not so sure of that I have a few friends who live in Japan and they drive their cars all of 150 K in a 2 year period and that is considered as High Mileage. I personally consider it a trip home from the workshop but then again I don't like what's inside the motors way to much pressed steal for my liking instead of machined and forged parts which cost more to make.
I actually know a couple of people who have Old Vesper's or Lambretta's and they are really reliable once properly setup but defiantly not my Cup of Tea. Old Harley's seem to be very reliable provided that they are properly restored and the operative word there is most defiantly properly. I've seen far too many with rebuilt motors which have never been properly rebuilt I think that those loose roller bearings in the Big End scare a lot of people off.
Me personally I consider the WLA Harley's as Agricultural Machinery as that is what they look like to me well the engines and all the machinery. Way too much overkill and no real power not to mention the 50 Degree V Motor which was never a performance design it looks as if it was made that way to fit in an existing space instead of designing the complete bike around the motor. No they just look terrible to me and the Rubber Band Harley's sold now to make them smooth enough to ride are a complete joke. The basis of the original Motor is retained and to take away the jerkiness of it them stretch a big rubber band to the back wheel so that there are fewer complaints about that Very Expensive Bike with way too much chrome plate on it being not smooth enough for the new owner. Who really in all honesty will park it in a garage somewhere polish it with a Diaper and treat it as if it has Wooden Pistons. After all they are still paying it off so they can not afford to actually ride it. Just ask Tammy on that one. ;)
Peugeot is exactly the same in their design but at least they hide all of the old obsolete design behind a nice looking shell.
Over here we had a company who made engines for Farm Water Pumps and the like a company called Southern Cross who produced a Single cylinder Diesel. These would run forever on whatever you feed them well for 50 or 60 years at least. Big bulky low speed and power things that just chugged away by themselves and these where pressed into service to drive the 32 V Generator Sets that where popular in the country many years ago. These would outlast the person who bought them but when they eventually broke many where patched together and never worked quite right again. When you look at those things and a Harley you see the same thing. :D
Col
[i]Edited Cus[/i] the TR Filter doesn't like the the word made up from [b]J[/b]ames [b]A[/b]urthur [b]P[/b]reswick a famous Engine Building Company from England
Doesnt Japan have a strict policy on motors? I read once that in Japan, every (I think it was) 50,000 miles and the motor needs to be replaced with a new one (not rebuilt).
150,000 in 2 years is quite expensive wouldnt you say?
by ontheropes
by hal 9000
150 K in the above means 150 Kilometers not 150,000 miles. :(
Cars in Japan just don't get used very often because the Public Transport System is so good.
OTR I completely agree with you about the Isolastic Engine Mounts that Norton used prior to switching to that system they just didn't have the same problems with the Exhaust Flanges though there was a problem with Electrolytic Decay between the Dissimilar Metals used to hold the Pipes into the Heads. Norton latter changed the system to a Stub coming out of the heads which the Exhaust Pipe slipped over and was clamped on. Much better and was a [b]Must Do[/b] Mod tot he older bikes here at least that was covered by Norton on Routine Servicing and was just done without the owner knowing or asking for it. Very Rough if you just had the Threads done recently but it worked a treat. Also we had a different system in place here where what is called a Keen Sert was fitted to the heads of all Norton's with Isolastic Engine Mounts and well all of the older Norton's as well. This involves boring out the Exhaust Ports tapping a new thread and then screwing in an Insert of Alloy driving in 4 Locking Pegs and then handing it back. When the Threads next got torn out it was just a matter of 4 small holes with a Cordless Drill with the head still on the motor and screwing out the old Ken Sert and screwing in a new one.
OH and it wasn't the fault of the engineers either as they didn't actually want the Isolastic Engine Mounts this was forced on them by the Accountant's that where running the company by then and they refused to allow the Engineers to redesign the Exhaust System till they got hit with several Legal bits of paper for shoddy production. Then they opted for the cheapest repair possible which involved screwing in the stub to the Heads and then clamping the exhaust Pipe back on after cutting the end off it where it sealed against the head.
What thing that I loved about the Norton Twin was the Head Nut between the Rocker Covers you needed a special socket to actually undo it. This Special Norton Tool was a thin walled Socket which just rubbed on the rocker housing a normal socket wouldn't fit all the way down to the nut so it would bind on the Rocker Housing and as the person turned it a small bit of the Metal would wear away making the unsuspecting person think that they had loosened the Head Nut when the socket was still half an inch away from the nut. I saw more than one case of Brute Force being applied to try to remove the head with the Center Nut still done up tight. :D
I even saw one example of the left hand Exhaust pipe still attached to the head with all the lower Finns missing off the head where a coal chisel was used to try to remove the head with that middle nut still in place. I actually had to take that particular head to a Specialist Alloy Head Repaired still with the Exhaust Pipe in it and a plastic bag full of bits of broken fin. Probably the most embarrassing thing I have ever had to do because the guy who did all of that work for us thought it was one of mine and no matter how much I tried to tell him otherwise he wouldn't believe me. I even had to take my Norton over there to pick it up and all he would say was that I had fitted a new head and used a second hand exhaust Header pipe to try to look better in his eyes. Till the day that he died he continued to remind me of that one event. :^0
Wasn't something that I really minded if I had stuffed up like falling off a racing bike after a race in the pits at 5 MPH and getting trapped under the bike when only a few minutes previously I had been ridding it at 150 MPH. Well actually falling off it wasn't such a big deal but as it was a Race Weekend there where people there so I looked like a right idiot. Or taking a car Cylinder head in there with all 6 Spark Plugs hex broken off the thing as I tried to remove the over tightened Spark Plugs. These where the Tapered Spark Plugs with a pressed steal casing which if overtightened would twist off the Hex and leave the Body of the plug in the hole with no easy way to remove it. Now that was a very expensive Service which should just have involved a Plug & Oil Change not the removal of the head and the two days it took to get the bits of the spark plugs out. And what was so galling was that once the main part of the body was machined out the threaded ares screwed out by hand. You just stuck a square Easy Out down the hole and wound it out by hand. But you did have to mount the head and then with a 45 Degree Countersink Tool re-cut the tapered area through the Plug Body. Once the seal was broken it just screwed out without any trouble. :D
I once worked for a Commercial Car Company for 3.5 days for the first three days we where given a free hand to design something different in the way of a car just a rough drawing mind you nothing special and on the fourth Day a team of Accountants where in place to explain why it was too expensive to actually make. These guys wet themselves if they can save .0001 of a cent per car built as over the production run of that one part that is a massive cost saving to the company. Of course if you can save $1.00 per unit you have a job for life no matter how much of an idiot you actually are.
GM here employed one of my friends for 10 years and all he ever did was to redesign an exhaust manifold which saved 10 cents per unit. They actually retooled to make this thing and then 2 weeks prior to production starting they scrapped that engine well the Accountants did anyway. That guy is still working for GM has never actually designed anything of any importance and loves the job. Personally it would drive me crazy working like that but I'm not interested in the weekly pay check either or the Minions running around cleaning up after me.
But I did love the way this guy described his work and how he put me down for not keeping a [b]Proper Job[/b] in his words. Apparently designing and manufacturing a series of Race Cars that went extremely well and where considered as the Must Have Competition Cars or working for a Large German Car Maker in their Design Team or working at the then Top F1 Team didn't count as I didn't keep a job with the same employer for 15 years like he did. But he is one of those people who love what he does so I don't suppose that I can say much at all.
Besides he's still working as an Mech Engineer where as I've walked away from that and am working with computers now. :D
Col
by ontheropes
by hal 9000
Now that's interesting must show that the Oil Pump was way too small so it was loosing pressure to the Big Ends and allowing the Bearings to fail. :D
Actually most of the Mech Engineers that I know who work for the Car Companies don't know which way is up. They have their cushy little jobs where they are treated as Gods who can do no wrong and they fall for the rubbish that they are feed. Could be part of the reason why I'm not overly fond of Quacks as well I suppose those whop believe the rubbish that others say about them and start to think that they are better than everyone else drive me nuts.
As for the Norton's with Isolastic Engine Mounts I always thought that they where a bit vague in the handling department sure that didn't vibrate anywhere near as much as the older ones but they just didn't feel quite right to me and you still couldn't see anything in the rear vision mirror so they didn't make any real difference in my humble opinion. :^0
OTR you'll like this one a friend of mine was riding pillion on his Norton caring a case of Beer with a broken seat which was just sitting on the frame that dreaded vibration had hit it again and broken more than just a few mounting bolts. Anyway at a red light they had a Police Car behind them and when the rider took off the seat moved so this guy held onto the beer and rolled off the bike in an effort to save the beer. The Police came and picked him up off the road and he was very proud of the fact that not one bottle had been broken. :D
What I loved about those bikes was the ability to change lines mid corner at break neck speeds and not have a problem of any kind. Try that with something from japan and see just how much of a Bitumen stain you end up with. As for a nice bike I always liked the look of the Quasar pity that they never actually made it past prototype stage as it looked a nice strong sensible layout that was the only real revolutionary development to single track vehicles that I have really ever seen. :0
I'm not supposed to even be able to move a bike off the side stand and if I was to listen to the Quacks I would be in a wheel chair but where's the fun in that? If I did as they say I still would be taking the same a=mount of Pain Killers and no longer be walking so I'll wait till I absolutely need the Opp and see what happens then.
Col
Sort by Trending