Desktop

Ask something
Discussion Locked

win98 se hardware wizard

0 helpful
3 replies

by hst125

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

add new hardware wizard .
keeps wanting to load standard pci graphics adapter on boot up any suggestions please

thank you

john

3 replies

by opatzg9

Hi John can you give a little more info:
Does your system have built in graphics or agp or pci card? Have you just added a new video card and this is triggering it. Your mmotherboard if it has built in graphics and you added a card will need the onboard vga disabled either in the bios or possibly with a jumper on the motherboard.
If you just installed and agp card you need to enable the agp bus with your motherboard drivers.
Hope this helps, but need more info.
Good luck

by hst125

I changed the on board 8 meg to none in the bios.On boot up the hardware wizard no longer appears.

Thank you very much OPATZG.

Thank you again

John

This discussion is closed to new replies.