Discussion Locked

window software to monitor system temp

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

what are you guys using ......window software to monitor system and cpu temp?

and what is the temp range that you are comfortable with ....in terms of your system ... your cpu running at?

8 replies

by pinoy_teknik

Well here i am using Via Hardware Monitor, coz' my chipset is VIA and it is budled my the motherboard CD...

There is a lot of software that you can download that will suit, what you looking for.... If your know the your motherboard brand try findout their site coz' the may be available utility for that matter.

WinBond I/O Hardware Monitor Utility
http://www.biostar.com.tw/support/driver/index.php3 (If you have Winbond)

Asus Tempster (for Asus Board)
http://home.swipnet.se/gollum/download.htm#tempster

SiSoftware Sandra
http://www.sisoftware.demon.co.uk/sandra/html/dload.htm

Hardware Sensor Monitor
http://www.hmonitor.com

AMI Diagnostic
http://www.ami.com/support/dlcenter/AMIDIAGWINDEMO0205.zip

Other is in the BIOS you will know your current CPU temp...

Pinoy_Teknik

by fenaikh

Hi
Motherboard mintor for all mother board suporting Primary Sensor Chips.

Good luck

Mohamed

MotherBboard Monitor
http://mbm.livewiredev.com/

***Very Important NOTE *********
After you copy the URL a space or a %20 maybe gets inserted in the URL when you paste it into your browser. Delete any spaces or such characters from the URL for the page to be loaded.
***Very Important NOTE *********

by thechas

I am using ASUS probe on my ASUS motherboards.

My Duron CPUs are running around 105?F
The system temperature varries over time, but stays around 80?F most of the time.

I have dual fan power supplies, a temperature sensing case fan that speedsup as the case warms up. (I place the senser in between my RAM modules)

My video card also has fans on it.

Most CPUs are rated for 55?C (131?F) or higher.
They should survive a 10% overtemp condition.

The motherboard components should alsobe good to around 55?C.

The problem is if any voltage regulators have poor airflow, or are under rated by design.

AMD has a couple of white papers that you can download on cooling design and requirements.

The big concern on a hot system is keeping the drives cool. Excessive heat can mess up the magnetic properties of the media, and the bearings in the drive.

Chas

This discussion is closed to new replies.