Question Locked

Window Standard Edition server 2003 NT Backup Error 8019

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is the error below that I'm getting on my log report. That my backup is failing. Our backtape tape is hp 4mm DDS ,36/72 with Dat72Drive. Have anyone had this problem before ? and if so does anyone have some suggestions or a solution in correcting this problem that I'm have with my backup?

Operation: Backup
Active backup destination: 4mm DDS
Media name: "Friday"

Volume shadow copy creation: Attempt 1.
Backup (via shadow copy) of "C: NOS"
Backup set #1 on media #1
Backup description: "Friday"
Media name: "Friday"

Backup Type: Normal

Backup started on 7/11/2008 at 11:02 PM.
Backup completed on 7/11/2008 at 11:21 PM.
Directories: 2780
Files: 33564
Bytes: 4,393,406,268
Time: 18 minutes and 29 seconds
Backup (via shadow copy) of "D: DATA"
Backup set #2 on media #1
Backup description: "Friday"
Media name: "Friday"

Backup Type: Normal

Backup started on 7/11/2008 at 11:21 PM.
The requested media failed to mount. The operation was aborted.
The operation was ended.
Backup completed on 7/12/2008 at 2:25 AM.
Directories: 6596
Files: 70656
Bytes: 38,741,961,952
Time: 3 hours, 3 minutes, and 53 seconds

----------------------

The operation did not successfully complete.

4 replies

by oh smeg

For function and have done the obvious and actually looked at it to see if it is broken I'm would try another tape after cleaning the Heads in the drive.

HP Taps and some of the OEM Makers Tapes did have a problem a while ago with not working in some HP Drives.

Col

by guysimard

I have already try cleaning heads in the drive several times. Now for tapes issue that isn't the problem neither. I started getting this error last week one of my backup. The chances of all my weekly tapes being no good are impossible.

by oh smeg

Write to 1 Tape and the other not being correctly recognized it does tend to point to a problem there.

Col

This discussion is closed to new replies.