Question Locked

Windows 2000 DC HDD failure. How do I integrate a new 2003 server?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I had a Windows 2000 server which was the DC for it's domain. I have had the Hard disks fail on this machine. I can still access the data via a boot disk but the server is effectively dead. I now have a new server running windows 2003. I need to make this the DC and get Active Directory running on it. It was connected to the domain before the old DC died, but wasn't configured as anything other than a basic server. The network has about 23 PC's all running windows 2000. Active Directory was running on the old server and each machine and user had an account. How do I restore services as quickly as possible under these constraints?

4 replies

by neilwaugh

Thanks for the info. Whilst this helped, the server 2003 that I have in place was not a domain controller. Can I still seize the roles under this constraint? Sadly my backup of AD on the 2000 server is corrupt so is there another way of getting this info from the disks of the old expired server?

by Former member

If you know or knew of the data at hand then put this into action. the only thing keeping you from doing this any faster is that your data from your back ups are corrupted. Which brings me to this question. In what way are they corrupted?. Is there any error(s) that show up?.
Other than that you have to start from scratch.
But make sure that this time your back up data is not bad, test the back ups, make a image get another server to do just the back ups of the data that you need.
Do not know if this will help you at all:
http://support.microsoft.com/kb/323417
Fix corrupted data:
http://corrupt-data.qarchive.org/

Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.

This discussion is closed to new replies.