General discussion


Wireless - IP configuration

By elbertsim ·
Our LAN using 10.20.30.X range, all clients connect to the gateway router to share internet connection.
We are using Windows 2000 server and DHCP service for client IP configurations.
We have 1 wireless router act as uplink switch in meeting room, we have 2-3 MOBILE user with wireless notebooks connected to it, sometime concurrently.

My Question is, on this wireless connection, why i always have to run IP release and renew to get correct IP (10.20.30.X) from my server, and sometime even unable to get correct IP?

Please help, thanks.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by rindi1 In reply to Wireless - IP configurati ...

Make sure you only have 1 active DHCP Server. The Wireless Access Points normaly have a built-in DHCP server which is active by default, and you probably have another one for the rest of your network. Deactivate the Access Points DHCP Service, so that only your original one is used.

Collapse -

by elbertsim In reply to

Poster rated this answer.

Collapse -

by elbertsim In reply to Wireless - IP configurati ...

This question was closed by the author

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums