Question Locked

wireless network connection problems

0 helpful
28 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having trouble getting my wireless connection working. The connection box says no wireless networks were found in range. I disconnected all the cables and re-connected them - nothing changed. I made sure that the wireles network connection is 'enabled' under network connections from the control panel.

I'm at a loss.

Can anyone help?

Thanks,
Shefali

28 replies

by older mycroft

Is this computer a laptop or a desktop/tower?

I presume you are trying to connect to some form of wireless router? If so, has this router ever been connected to a computer BY WIRE? If so, which computer?

Have you ever connected the problem computer to the router by wire?

Have you tried using the [b]WIRELESS WIZARD[/b] yet?

by shefali2

Apologies, sure - I didn't know what to post. A friend helped walk me though a couple of things.

So, yes, this is a laptop - IBM Thinkpad T43. I am currently connected by wire, which is connected to a netgear wireless router which is connected to a modem.

I did try using the wireless wizard but when I get to the step that asks you to set up the network manually, I get an error: the wizard could not create a wireless network.

The other option at that point is to use a usb flash drive. i tried this as well with my external hard drive. but, then it proceeds to ask you to unhook the flash drive and plug it into the connection source and I looked at the modem and the netgear wireless router and don't see any place to connect the flash drive.

Thank you...

by older mycroft

You previously stated that the Wireless Connection WAS enable - but did you disable the Wired connection at the same time?

If not, you should.

*Also [i]"..when I get to the step that asks you to set up the network manually.."[/i] - why MANUALLY ??

Why don't you just let the Wizard run on auto ?

Edit for *

by l-mo

We need more info but I can say:

Some laptops have switches on the case. They can get in the way.

Also, make sure you keyboard shortcut isn't getting in the way.

If you gave us more details we could be more helpful.

by shefali2

ok, i just posted more info, but to your point, i don't see any switches on the laptop that i might have hit and am not aware of what kind of keyboard shortcut you might think would have done it. either way, not sure how to figure out if this is where the problem is.

also, i found online that it would be helpful to go into the command line prompt thingy and do an ipconfig to go to the webpage of my router. however, it didn't work because i don't know what username/password to enter. not sure what to do with the info, but here is what it says:
Windows IP Configuration Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected

Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected

Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . :
Autoconfiguration IP Address. . . : 169.254.94.203
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

by shefali2

I didn't realize the lan had to be disconnected...?

i'll try that now.

by older mycroft

Also "..when I get to the step that asks you to set up the network manually.." - why MANUALLY ??

Why don't you just let the Wizard run on auto ?

Don't just 'disconnect' the LAN, you also need to DISABLE it too.

by shefali2

I disabled the connection to the LAN (network connections, right clicked on the one that said connected and hit disable). Then I tried finding the wireless network connections. It still didn't find anything. I live near a bunch of other people, so it has in the past, when it worked, found a bunch of other connections.

Also, I don't see the wizard option to run on auto? I go to the control panel to the wireless netowrk setup wizard hit next and can choose to either set up a new netwrok or add a computer to my 'Jungle' network. I chose the 1st. and then chose 'automatically assing a network key (recommended), next, that is where i am offered the option to do the manual thing or the usb thing.

shefali

by older mycroft

Surely you are wanting to ADD your wireless connection to your EXISTING network? ;)

by shefali2

i just went to the wireless network set up wizard and selected the other option you suggested: add new computers or devices to the 'Jungle' network and hit next. this takes me to the same spot i was before: either manually set up the network or use the usb. arg!
when i chose manually, it gives me the same error i got before.

by older mycroft

Open up your Wired IP configuration (right click it and go into the Properties area) - make a note of all the settings - then use the Wireless Wizard and select the manual option.

You'll have to enter all the details manually, I suppose.

Don't forget you'll also need whatever SSID that's been allocated together with any passwords you've created.

As to why you're not 'seeing' any of this supposed bunch of other signals that you used to, maybe they're all switched off! They don't HAVE to be on - they're not yours. ;)

by shefali2

ok, sorry, where do i find the wired ip configuration? also, how do i find the ssid and passwords? i am not sure if they exist or if the last person who tried to help me deleted all that...

by shefali2

i don't have the slightest clue what you might be referring to. i've always just gone to the view wireless networks dohickey and connected with whatever key. i never had to actually turn a swtich on the laptop with my hands... is that what you're referring to? if so what does it look like?

by older mycroft

I'll be honest - I'm not intimately knowledgable with ANY Thinkpads but all laptops have an electro-mechanical switch somewhere (either a Press-Button or a Slider) that activates'deactivates the flow of power to the wireless antenna, invariably indicated by a little glowing light.

If you have already been using the wireless function on this Thinkpad and now, all of a sudden you're not picking up any signals, it is highly likely that the antenna has been switched off.

Have a look in your Owner's Manual. There must be a diagram somewhere to show you how to turn the antenna ON & OFF.

by shefali2

i think we might be getting somewhere. thank you.

i looked up the info online and found this:
http://forums.speedguide.net/showthread.php?t=214308

i tried the fn+f5 combo it says for my laptop and got this message...
unable to change power state of 802.11 wireless radio. update the driver for the wireless adapter.

then i get a little black ibm box that says
tabs (location) wireless radio
radio, status, change status
bluetooth radio, On (and here I can select "off")

so it must be on but i need a driver?? perhaps?

by shefali2

i was on the same link, but i am not sure which link will get me the download i want. any idea? i am running windows xp version 5.1

by shefali2

i got the access connections software to upate. it tells me that my wireless card, which now appears in the list, is "on" as well as the bluetooth lan (which was there before).

but when it goes to connect wirelessly it fails because something about the installation of the driver didn't work. (it is nice that the troubleshooting feature says what s wrong).
i've re-installed the driver a couple of times and re-booted and nothing changes.

maybe i'll try again tomorrow.

by older mycroft

There's an XP Driver dated [b]06 April 2009[/b]

I'd think that would be a decent place to start. ;)

by older mycroft

It'll suck you into getting a 'Free Scan' then refuse to let you download anything without parting with your moolah.

by shefali2

i downloaded it and two other things it said i needed. i ran all of them. and then i went to the wireless network connections, right clicked, went to properties, configure, driver, update driver. this took me to the hardware update wizard but it can't find the file. so then i told it i would show it the file, where the .exe is downloaded. so i browse to the place that is saved but it doesn't 'see' it because it is looking for a .inf file. suggestions?
thanks so much for your help!

by older mycroft

So the first thing you've got to do is place it in an easily accessible directory and RUN it - it will self-extract into that directory, presenting you with all the required files.

[u]Here are the instructions straight from Lenovo:[/u]

Downloading files
1. Click once on the underlined file name with the left mouse button. Once
this is done, a pop-up window will appear.
2. In this pop-up window, choose (using the left mouse button) the directory
you would like to download the file to and click the "Save" button.
A different window will appear and the download will begin and complete
without your assistance.
3. Once the download has completed, there may or may not be a message stating
that the download completed successfully.
4. After being downloaded, the file will need to be extracted.

Extracting files
5. Locate the directory where the file was downloaded.
6. Locate the file that was just downloaded and double click it using the left
mouse button.
7. The file will begin to extract in the directory where the downloaded file
is located.

Install files
8. Make sure to be logged on with administrative privileges.
9. Open an Explorer and locate the directory where the files were extracted.
10. Double-click Autorun.EXE.
11. Follow the instructions on the screen.
Note:
If you use ThinkVantage Access Connections, Intel PROSet/Wireless component
needs to be installed as pre-selected during the above procedure.
12. Restart the computer.

Finally delete the file saved in the step 2.

by shefali2

for all your help. much appreciated, you have no idea!

by npbatiller

Did you check if the router's setting is hidden? If so, you need to know the SSID.. plus the key to it.

Cheers!

This discussion is closed to new replies.