Question Locked

Wireless Works, but router won't hold connection to laptop

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My Lenova T61 has every device for connections and it successfully connects all over the world to wireless networks. Hotels, homes, you name it. But, here in my new vacation rental which provides wireless, it won't.

My laptop recognizes the connection. I highlight it. hit "connect" and then enter the proper passwords. It accepts the passwords and tries to connect me. When it gets to IP address it gags. I have my laptop set for automatic, not fixed IP. Works everywhere else. No go, won't hold the connection for more than a second.

If I change the IP to fixed and use a default like 192-168-0-1 it will connect and hold for several seconds, but then drops the connection.

I have reset the computer and router (Linksys Wireless-G) many times. I have turned off my firewall. No clue why I can't connect and it is driving me bonkers! Help!!

John

4 replies

by jck

I know with the Linksys at my parents, I had to change the default router IP to 192.168.2.1 (not x.x.1.1 like I used with every other Linksys router before)

Also, check packet sizing in your router. I set mine to 1536 (i think).

And, check the connection life setting (that's not the tech name, but close enough)

Also, you might look into updating the firmware on the router if it won't work with any other computer too. might be the router has a glitch that's firmware fixable.

Also, try a different channel on the router...maybe it's some outside interference?

Just the only things I could think to suggest to help.

by ---tk---

Does you PC have the Intel Chipset Drivers?

I have found that I have to switch between the intel wireless (proprietary)utility and the Windows wireless utility. Depending where I am...

Which utility controls your WIFI connection?
If the Intel is controlling everything, there should be a check box somewhere in the program to designate Windows to control the device. Then go into the windows and click connect to your WIFI.... Sometimes this fixes it (like I said, its a shot in the dark)... If windows is controlling the device, go into the utility and have the Intel Utility control the device...

I would also try and update the drivers... Also if you do not have the intel wireless utility, switch between what you do have... I looked up your Model, and it appears that there are a few different wireless devices that are available for that laptop... So I took a wild guess...

by smokeymd

ive had this router for about 4 years know and it worked great! until know im running into the same problem it wont hold the 192.168.1.1 ip address. It just gives me some bullshit random ip address and its annoying !

This discussion is closed to new replies.