Desktop

Ask something
Discussion Locked

XP-HP issues

0 helpful
1 reply

by ric.kube

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
HAs anyone else had the problem of installing XP on a network workstation with an HP laserjet printer (2100tn, 8100, 4500) and having the printing all of a sudden printing with a 2.5" left margin and cutting off the writing on the right. I have tried various drivers with no lucj

1 reply

by admin-stuart

Yes, I recently had a similar problem with a color LJ4500. I did a printer reset and my problem disappeared. Procedure (for 4500, check HP site for different printer):

Turn off printer
Unscrew screws holding JetDirect card in.
Pull out JetDirect Card 2-3 in.
Hold "Go" button as you turn printer back on.
Release "Go" button when calibration message appears, then turn printer off again
Reseat JetDirect Card
Turn printer back on

Hope this works for you.

This discussion is closed to new replies.