Discussion Locked

XP network missed connection

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Upgraded 98SE to XP Pro. Connecting to
Internet wasn't a problem, but now is.
Contacted ISP-had me go through a series of
steps: command, ipconfig /release, ipconfig
/renew. I get a 169.254.149.101 for the
Autoconfiguration IP address. "Anerror
occurred while revising interface Network
Bridge (Network Bridge) 3 : An operation was
attempted on something that is not a socket."
The ISP referred me to the manufacturer. Said
something about reinstalling TCP/IP.
Fortunately, I have another computer from
which to write this plea. Thank you for your
help! Compaq Presario 5716.

11 replies

by yuu_tomo

you probably didn't install TCP/IP or it was a corrupted install, it's quite easy to do. just open the control panel, click on add/remove, the add/remove window services and uncheck networking services, then reboot, and then go back and check network services and reboot, and that should take care of it. if not then let me know.

by akula

If reinstalling TCP/IP doesn't work, make sure you have the correct driver for your network card.

by dcosgrove

Thats not a real ip address, what type of network card are you using? Have you run the network repair wizard? It's premature to say, but I suspect you need to uninstall the network bridge, the repair wizard has a habit of using it when it sees a firewire device. when the bridge has been successfully removed, ensure the cables are properly connecte and you get a lan light on the cable modem and a link light on the lan card. Unplug the cable modem then shut down the computer. Plug the cable modem in and wait untill it finishes it's diagnostics, you will get a solid light for "cable" or similar on most cable modems. Turn on the computer and see if it works.

by brifd1

Is there an easy way to determine what kind of network
card one is using?

by brifd1

Now, a new problem. The computer starts, but
never stops so I can select the "Start" menu
(as an example). When I do a Ctrl/Alt/Del, I see
47 processes running. What do I do now?

by brifd1

Interesting thing. I got a new router and
switched from USB back to Ethernet, and it
worked. This suggests that, for ? reason, the
USB connection went faulty on one end or the
other, or the cable went bad.

This discussion is closed to new replies.