Question Locked

Cisco 800 series DDNS and configure router for dns request

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a cisco 871w with advip os. I have dsl and configuring for ddns to a ssh server. Formerly used ddns client on xp with web server in small home network. Configured PAT with port forwarding. I static mapped host dyndns to site ip and at least now get some results but not success. Any suggestions?
01:45.432: HTTPDNS: Update called for xxxx.homeftp.net <=> 71.251.54.31
01:45.432: HTTPDNS: init
01:45.432: HTTPDNSUPD: Session ID = 0x5
01:45.432: HTTPDNSUPD: URL = 'http://name:password@members.dyndns.org/nic/update?system=dyndns&hostname=belt.homeftp.net&myip='
01:45.432: HTTPDNSUPD: Sending request
cisco871(config-if)#
02:05.432: HTTPDNSUPD: Call returned Connection time out for update xxxx.homeftp.net <=> 71.251.54.31
02:05.432: HTTPDNSUPD: Freeing response
02:05.432: DYNDNSUPD: Another update completed (outstanding=0, total=0)
02:05.432: HTTPDNSUPD: Clearing all session 5 info
#############################################################################
cisco871#show host
Default domain is nsrest01.verizon.net
Name/address lookup uses domain service
Name servers are 71.252.0.12, 71.242.0.12

Codes: UN - unknown, EX - expired, OK - OK, ?? - revalidate
temp - temporary, perm - permanent
NA - Not Applicable None - Not defined

Host Port Flags Age Type Address(es)
office.xxxx.com None (perm, OK) 8 IP 192.168.1.0
basement.xxxx.com None (perm, OK) 7 IP 192.168.2.0
members.dyndns.org None (perm, OK) 0 IP 63.218.192.33
xxxx.homeftp.net 443 (perm, OK) 0 IP 192.168.1.100

4 replies

by tazz20019

Had to create acl for it on Dialer interface.

by ipcbcory

There is some good resource and background info on the Cisco 800 here, along with password recovery and IOS upgrade instructions for the Cisco 800 Cisco 800

This discussion is closed to new replies.