Every once in a while I come across a little gem for tablets
that really makes my day. Yesterday was once such moment. I do a lot of graphic
design and other tasks that require finer use of a cursor than what a mouse can
deliver. This could be creating images or even signing documents. When I do
that, the mouse simply doesn’t cut it. Yes there are Bamboo tablets that are
made for this very purpose. But when you already have a Galaxy Note tablet, why
purchase the extra hardware? Unless you need the finer detail of pressure
sensitivity, making use of that Galaxy Note is a quick way to get a large
digitizer connected to your PC.

I should preface this by saying this software (SPenDigitizer) is in early development – but
it works great. It’s also not something you’ll find in the Google Play Store.
In fact, this was a weekend project for a developer as a proof of concept – the
end result being something that is quite usable. But because it is in early
development, there aren’t any settings to deal with or incredible feature list.
This is a simple piece of software that does one thing and does it well. In the
immortal words of Captain Jean Luc Picard, let’s make it so.

What you should know

  • You can use this with either your finger or the pen
  • The tablet and PC must be on the same network
  • Hovering the pen will move the cursor
  •  Pressure sensitivity is not read
  • You can single-click on the desktop using the pen
  • Orientation of the tablet must be chosen before removing the pen (you cannot change it… yet)
  • You must enable unknown sources for the installation on the
  • I was only able to test this on Windows 7, but it should work with Windows XP

Installation: PC

There is a tiny application that must be installed on the PC. Download this zip file and follow these steps:

  1. Extract the zip file
  2. Change into the newly created directory
  3. Double-click the SpenClient.exe file
  4. If prompted, give the file permission to run
  5. When the configuration window opens (Figure A), switch the port, if necessary
  6. Click Save
  7. Minimize the Digitizer window

Figure A

This is all you get on the PC side.

That’s all there is to do on the PC side of things. Let’s take
care of the tablet end now.

Installation: Galaxy Note

As I mentioned, you first have to enable unknown sources on the
tablet. Here’s how:

  1. Open the Settings window
  2. Scroll down to Security
  3. Tap to enable Unknown Sources (Figure B)

That’s it.

Figure B

Prepping the Verizon-branded Galaxy Note
tablet for the digitizer.

The next step is to download that same zip file to your tablet. You’ll also need to
install an application that allows you to unzip files. I use UnZip. Install that as you would any file and
unzip the file like so:

  1. Open up the UnZip application
  2. Navigate to the location of the downloaded file
  3. Tap on the .zip file

That’s it. You should now have a newly created folder that
contains the .exe (for the PC, but you don’t need that now) and the .apk file that’s used to install the application on the tablet. Simply follow these

  1. Open up My Files
  2. Navigate to the newly created folder (that was created
    when you unzipped the downloaded file) in your downloads directory
  3. Tap on the SPenDigitizer.apk file
  4. Select Package Installer (if prompted)
  5. Allow the installation to complete

The digitizer is now ready to use.  All you have to do is launch the
SPenDigitizer application and begin using the tablet as a digitizer for your

It’s not nearly as refined as the Bamboo line of digitizers,
but in a pinch, this little trick does an outstanding job of working as a
digitizer to help you refine your mouse actions on your PC. Use this to create
drawings, write your signature, or get creative with it. The software is free,
and it’s a lot cheaper than purchasing a
third-party piece of hardware.