Question Locked

Compatibility of G4MX440-VTP Graphic Card with MSI P4MAM2-V Motherboard

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

I recently borrowed a graphic card from a friend as I want to spread my display over 2 monitors. The Graphic Card is a G4MX440-VTP. My motherboard a MSI P4MAM2-V. Problem is, when I start my computer with both monitors plugged into the graphic card, I see the normal Windows start sequence and the Windows XP logo on both screens, but as soon as I should see the Windows Welcome/Login screen, my computer restarts. There is a short flash of a blue screen error on the second monitor, which I've never been able to read (or have my computer stop on). Both monitors work perfectly fine on their own. I have yet to test both VGA slots on the card itself, but I presume their both fine as I DO see (part of) the start up sequence. Is the graphic card simply too old? Is it incompatible with my motherboard/or with Windows XP? What can I do? Thanks

6 replies

by jamesrl

I googled it and went to the MSI webstite; it is a video card with a nVidia chipset in it.

I would get the latest and greatest nVidia drivers for it. If you don't have the nVidia drivers Windows is using a generic driver which won't allow dual screens. You can get them from MSI's site (www.msicomputer.com) or nVidia's, both will work fine.

Its a 2002 vintage card so it should work with XP just fine. It isn't fast by today's standards but should be ok for most applications, as long as you don't want to play the latest games.

James

by nikolai.hobruecker

That sounds great already...however I HAD drivers (from nVidia) installed, and it still didn't work, do I have to uninstall the default Windows drivers first? If so, then how do I go about doing that? Should I burn the drivers onto CD and (try) and have Windows install the drivers before entering Windows? ...as it is right now (if I have both monitors connected) I can't get into Windows (see first post), does that mean only cabling one monitor, installing drivers, shutting down and re-cabeling the other monitor? Or what's the best way about going about this?

As for the newest games...nope. Only usage for the card is video editing, photoshop, and other adobe design progs. (with dual monitors). I've got a 256 MB card (with one VGA and one DVI) for gaming ;).

Thanks,
Nikolai

by jamesrl

Then go into the nVidia software to configure the second monitor, then reboot.

James

by nikolai.hobruecker

That's the problem right now, the options for the second monitor are greyed out. I can't change anything with the monitor settings (it seems, until I have both monitors connected) and the problem there was that the computer didn't want to boot. ???

by nikolai.hobruecker

I uninstalled all the drivers, rebooted, and re-installed them. Everything works like it should! Thanks for the help.

This discussion is closed to new replies.